TheSalt Spray Test
Model | Work Room Size (mm) | Exterior Size (mm) | Voltage | Power (KW) |
YWX/Q-150 | 600x450x400 | 1100x750x930 | 1Phase/220V | 2 |
YWX/Q-250 | 900x600x500 | 1500x900x1150 | 1Phase/220V | 2.5 |
YWX/Q-750 | 1100x750x500 | 1700x1050x1150 | 1Phase/220V | 3.5 |
YWX/Q-010 | 1200x800x500 | 1800x1100x1200 | 1Phase/220V | 3.5 |
YWX/Q-016 | 1600x900x600 | 2300x1300x1300 | 1Phase/220V | 5 |
YWX/Q-020 | 2000x1000x600 | 2700x1400x1500 | 3Phase/380V | 7.5 |
Specifications:
• A waterproof structure is adopted between the chamber cover and chamber body, thus there is no salt spray overflow.
• Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
• Working room temperature range:RT+5℃~50℃ (The setting value cannot be lower than the current ambient temperature); Saturated barrel temperature: +40°C~+63°C;
• Brine temperature: preheated by laboratory temperature; Temperature uniformity: ≤ ±2°C; Temperature fluctuation: ≤ ±1°C;
• Test time: 0-99,999 M adjustable; Settlement: 1-2ml/80cm²/h;
• Spray method: NSS (neutral) test, AASS (acidic) test, CASS (copper acceleration) test, custom test, programmable test, each test can choose continuous spray or intermittent spray (according to
industry standards). The ratio of each test solution has a corresponding explanation in the test setting interface.
• Sample holder: at an angle of 15 to 30 degrees from the vertical surface (with sample standard placed). Other irregular samples are recommended to remain tilted. The V-groove has a single
weighing capacity of 3KG, and the O-bar has a single bearing capacity of 5KG. It is strictly forbidden to place samples under heavy weight.
The working size is 1200*800*500mm. It is according to IEC60068-2-11, IEC 60068-2-52 and other ...
TheSalt Spray Test Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 600x450x400 1100x750x930 1Phase/220V 2 YWX/Q-250 900x600x500 1500x900x1150 1Phase/220V 2.5 YWX/Q-750 1100x750x500 1700x1050x1150 1Phase/220V 3.5 YWX/Q-010 1200x800x500 1800x1100x1200 ...
Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 600x450x400 1100x750x930 1Phase/220V 2 YWX/Q-250 900x600x500 1500x900x1150 1Phase/220V 2.5 YWX/Q-750 1100x750x500 1700x1050x1150 1Phase/220V 3.5 YWX/Q-010 1200x800x500 1800x1100x1200 1Phase/220V 3.5 ...
Product Description The Salt Spray Test Machine Model Work Room Size (mm) Exterior Size (mm) Voltage Power (KW) YWX/Q-150 600x450x400 1100x750x930 1Phase/220V 2.5 YWX/Q-250 900x600x500 1500x900x1150 1Phase/220V 3.5 YWX/Q-750 1100x750x500 1700x1050x1150 1Phase/220V 4.5 YWX/Q-010 ...
Salt Spray Test The salt spray (or salt fog) test is a standardized and popular corrosion test method, used to check corrosion resistance of materials and surfacecoatings. Usually, the materials to be tested are metallic (although stone, ceramics, and polymers may also be ...
Dingtao Industrial Co.,Ltd Brand:wonderful-test Precision Salt Spray Test Chamber WT-60A Technical Parameter Model WT-60A Brand Wonderful-Test Interior Dimension(W*D*H)(mm) 600*450*400 Exterior Dimension(W*D*H)(mm) 1070*600*1180 Laboratory temperature NSS ...
Introduction SAS series salt spray chamber, is one of test equipment for “three" artificial climate. It is common used in Defense industry, research institutes, light industrial electronics, architectural coatings, bicycles,motorcycles and automobile manufacturing industry. ...
Use Our company produces series of SAP salt spray test chamber, it’s one of the artificial climate environment "three defense" test equipment.It’s the defense industry and scientific research institutes, light industry, electronic, architectural coatings, bicycle, ...
Uses Our company produces the series of SAO salt spray test chamber, is against the surface of various materials after plating, anodizing, painting, oil, rust corrosion treatment, test the products of corrosion; so under specific environmental conditions on the sample in an ...