Introduction:
DQ860MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside diameter and less than 7.8A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor running smoothly almost without noise and vibration. Holding torque when DQ860MA runs under high speed, is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
wantai stepper motor Nema17,2phases,44mm cnc route model 42BYGH801 Phase 2 Reted voltage 12V Resistance 30Ω / phase Holding torque 3800g.cm Rotor Inertia 68 g.c㎡ Step Angle 1.8° Rated Current 0.4A Phase Resistance 28mH Insulation Class Class B We are ...
wantai stepper motor Nema11,2phases, 32mm cnc router model 28BYGH102 Phase 2 Reted voltage 3.8V Resistance 5.6Ω / phase Holding torque 600g.cm Rotor Inertia 9 g.c㎡ Step Angle 1.8° Rated Current 0.67A Phase Resistance 3.4 mH Insulation Class Class B ...