We can produce various pneumo-hydraulic pressurization systems according to customers’ requirements. These systems can be used for pressure tensioning, hydraulic drive and control, hydraulic test, etc. The maximum pressure can be up to 6400bar. ODMT Pneumo-hydraulic Pressurization System has compact structure and is easy to operate. What the users need to do is only to lead the drive air to the liquid port, then adjust the pressure regulating valve of the drive circuit to reach the needed working pressure. Typical liquid pressurization operation:
Typical applications:
◎ Static and burst test for valves, pipe fittings, etc.
◎ Test for automobile brake system and nozzles.
◎ Chemical reagent injection into pipelines or reaction kettles.
◎ Putting coolant into jars.
◎ Providing force for clamping, forming, drilling, shearing and stamping machines.
◎ Providing buffer and lift force to protect molds when large presses overload.
◎ Static and dynamic test for aviation accessories.
◎ Performance test and calibration for instruments.
◎ High pressure cleaning and water injection of waterjet cutting equipment.
◎ Injecting oil into lubrication system of mechanical equipment.
◎ Providing clamping force for valve test.
◎ Providing press force for shaft sleeve and cylinder liner.
◎ Controlling ground and underground safety valves.
The Smok T-Air Subtank vape tank combines improved performance with a straightforward design. It\'s the perfect option for vapers looking for a simple-to-use sub ohm tank because it\'s made to produce enormous amounts of vapour and give a flavour to match. The T-Air comes with ...
Gas Pressurization System We can produce various pneumo-hydraulic pressurization systems according to customers’ requirements. These systems can be used for gas actuation, gas filling, air tightness test, pressure test, etc. The maximum pressure can be up to 2000bar. Typical ...
Description I.Introduction The air driven-liquid booster system is controlled by PLC and outputs a liquid pressure of 0-64MPa according to requirements. Equipped with OGD80 gas drive liquid pump, low pressure pressure gauge, high pressure holding pressure switch, unloading ...
Description GAB02 gas amplifier is suitable for the working environment that needs to increase the pressure of the original air compressor system. It can increase the pressure of the workshop air supply system. It only needs to use the compressed air in the working system as ...
This series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of aluminum alloy or stainless steel. The full set of sealing parts is imported. The maximum drive pressure is 10bar. We ...
M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and fro automatically. This series of product is produced by introducing related technology abroad and designing according to the standards of our country. The air driven ...
24 V AC Motor Driven 100 ft. Heavy Duty Hose Reel Air motor driven cable reel Product Description JARCH\'s Series 30000 hose reels are designed for rugged, heavy duty applications requiring long lengths of hose and large storage capacity. All-bolted unitized construction with no ...
Liquid nitrogen tank Detailed Images Drawing of liquid nitrogen tank YDS-series products are mainly made up of outer shell, inner vessel, neck tube, multi-layer isolating material and canisters. 1.The outer shell and inner vessel are made of the aluminum alloy plate featuring ...
Perforated filter disc, made of stainless steel, aluminum, low carbon steel, copper, brass, has different shapes such as triangle, round. With high accurate filter precision and high anti-corrosion performance and rust resistance, perforated filter discs can be used in ...