Basic information of ResilientGate Valve
This valve is used as a two-way closed circuit device.
Features of Resilient Gate Valve for Underground
1. No need for sluice Wells, which reduces the amount of installation work;
2. Does not affect the traffic, and underground parts of the integration, effectively prevent theft;
3. Stem has a special extendable structure, which can effectively prevent the ground from sinking;
4. Long life, no internal leakage.
Principle of ResilientUnderground Gate Valve
This valve uses the form of pin coupling to transfer the sensor force existing in the gearbox and transmission shaft buried in the ground. The telescopic drive rod is extended until it is installed in the underground bonnet. This layout and approach ensure that work is done properly and Installation and Commissioning of Resilient Gate Valve for Underground
with the water supply pipe, extend the expansion drive rod to the set height, tighten the expansion limit device to maintain the extension height, backfill the pipe groove, tamp and make cement pier foundation, put the valve box plate on the cement foundation, place the valve box cover, lay the road surface and make the valve box cover equal to the road surface. For specific use, please consult ZECOValve Group
Product scope, Standards & Materials of Resilient Gate Valve for Underground
Size Range: 2"~12"
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10, EN558-1
Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2
Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208 / EN 12226-2
Bronze Gate Valve China Manufacturer Bronze gate valve for sale uses bronze material, which has excellent wear resistance and corrosion resistance, good casting performance and airtightness. The bronze steam rated gate valve is widely used in higher load parts, such as ...
Duplex stainless steel has the advantages of both ferritic stainless steel and austenitic stainless steel: austenitic stainless steel reduces the brittleness, maintains excellent toughness and weldability; ferritic stainless steel improves the yield strength, intergranular ...
Gate Valve Main parts for Gate valve consist of Valve Body, Bonnet, Disc, arm, shaft, guide and valve seat. Those parts of a big gate valve, chain operated gate valve, or high pressure gate valve can be made either from gate valve castings or forgings. Available material by ...
MstnLand, as a professional cast iron gate valves manufacturers, provides high performance gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemical, oil, offshore, power station and ...
The cast steel gate valve wcb body is made of metal steel material. The opening and closing member of the cast steel gate is the gate, the direction of motion of the shutter is perpendicular to the fluid direction, and the gate valve can only be fully open and complete, and ...
Stainless Steel Gate valve Features Small flow resistance. Because the internal medium channel of the valve body is straight-through, the medium is flowing straight, so the flow resistance encounters is small. In order to make a reliable valve seal, it is reasonable to ...
Din 3352 f4 gate valve is the production standard of the German-labeled valve, which includes metal sealing valves and soft sealing valves. F4 is the structural length of the German-labeled valve, which is included in the DIN3202 standard, and the corresponding is F5. In ...
The rising gate valve is also referred to as a lifting stem gate valve, which is up and down together during the opening and closing process. The handwheel drives the valve stem nut to rotate, and the nut is rotated to drive the valve rod up and down. The valve stem is not ...
DIN3352 is the production standard of the German standard valve, which includes metal sealing valves and soft sealing valves. F5 is the face-to-face length of the German standard valve, which is included in the DIN3202 standard, and the corresponding is F4. In contrast, the F5 ...
The flange gate valve is a gate value of the flange, which is most common. The flange gate valve is stable and reliable during the pipeline, so the flange gate valve is often used on the high pressure line. The metal sealing flange is a gate valve that refers to a gate valve of ...