We are Saigao group can do piston and Plunger pump. Such as the following:
BW Series Mud Pump
BW Series Mud Pumps are mainly used for supplying flushing fluid to the borehole in core, geothermal, water resource, shallow oil, CBM and other drilling process. The fluid can be divided into mud, water, etc. They also can be used as transfer pumps of the above-mentioned medium. This series of mud pumps are with simple structure and easy to maintain and operate. Piston, lip-shaped and self-sealing type, is made of rubber or PTFE and nylon pads, equipped with shock-resistant pressure gauge, necessary spare parts and special tools. Bi-metal liner can be used to extend service life of pump greatly.
NBB Series Mud Pump
NBB Series Mud pumps are mainly used for the core, coal geology, metallurgy geology, hydrogeology engineering hole drilling fluid is supplied, flushing fluid can be divided into mud, water, etc., may be used as the above medium pump.
Structural features
The mud pump is crank structure, horizontal triplex single acting piston pump, the piston is self-sealing lip, made of rubber or PTFE and nylon protective pads pressed, the pump adopts auto gearbox, variable five kinds of flow, the pump is compact, high efficiency, durable, safe, reliable, easy maintenance, low maintenance costs.
ZB Series Grouting Pump
ZB Series grouting pumps are mainly used for kinds of weak corrosivity viscous and nonviscous liquid grouting(such as water, mud), especially for vertical shaft working face grouting, goaf filling, coal mine water inrush governance and so on.
The pump is triplex single-acting plunger high pressure pump, fitted with international first-class gearbox, which is of features like compact structure, multistage speed regulation, realizing different flow rate and pressure, meeting the grouting requirements of different formation. Electric motor drives triplex pump through transmission system. It has many advantages, like convenient adjustment for pressure and flow rate, long service life and so on.
3NB & 5NB Series Mud Pump
3NB & 5NB Series Mud Pumps are mainly used for oil, water well, geothermy, CBM, shale gas, coalfield exploration, freezing well as well as well other drilling ,well cementation, work-over and other operations in industrial and mining enterprises. It is used for transferring mud, clay gum, mortar and other medium to the borehole. The pump adopts international advanced technology. It is characterized by advanced structure, reliable operation, good suction performance, long service life of wearing parts, easy for maintenance and repairing and so on.
F Series Mud Pump
F Series Mud Pumps are mainly used in oil field and geological prospecting for well drilling, well work-over, cementing, water shut off, water flooding and sending mud, clay, grout and so on.
1. The maximum lift of the rubber-lined impeller should not exceed 63m. The maximum allowable linear speed should not exceed 30m/m. 2. Bearings generally use rolling bearings and are lubricated with thin oil or grease. Their operating temperature should not exceed 75°C. 3. The ...
The AH slurry pump is a double-casing slurry pump. It has a high-chromium alloy lining and a rubber-lined lining. Today we will briefly talk about the characteristics of the rubber-lined slurry pump. 1. The head of the rubber-lined slurry pump does not exceed 63m; 2. Slurry ...
Rubber pump, AHR slurry pump, corrosion-resistant slurry pump generally means that the lining of the slurry pump is made of rubber. From the lining material of the slurry pump, it can be divided into rubber lining and metal lining (high chromium). The rubber pump is a slurry ...
AH type slurry pumps are commonly made of two materials: high chromium alloy and natural rubber. Today we are going to talk about slurry pumps made of natural rubber. Rubber slurry pumps are also called rubber-lined slurry pumps. They are characterized by corrosion resistance. ...
The common series of submersible slurry pumps produced by our factory include SP series and ZJL series. The SP series is further divided into SP and SPR. SP means that the flow parts are made of high chromium alloy, and SPR means that the parts below the flow parts and the ...
When analyzing the energy consumption under different adjustment methods, the article only analyzes the two widely used adjustment methods: valve adjustment and pump variable speed adjustment. Since the purpose of parallel and series operation of centrifugal pumps is to ...
Why is the pump shaft of the slurry pump relatively straight? Today we will talk about the straightness of the slurry pump shaft. (1) Straightening using a hand screw press This method can be used when the shaft diameter is small and the bending is large. First, place the shaft ...
Various problems will be encountered during the use of slurry pumps. Today we are talking about the reasons and solutions for the heating of the slurry pump body. 1. Incorrect selection of the slurry pump results in a mismatch between the pump and the motor, resulting in heat ...
When our fine sand recovery pumps are initially designed, we usually have one extra pump as a backup pump. So if the backup pump is never used, should it be left there forever? Of course not, our backup pump also needs to be cranked regularly. Let’s take a look at the role of ...
There is a correct gap value between the impeller and the rear guard plate of the slurry pump. We have previously introduced the method of adjusting the impeller clearance of the AH slurry pump. Today we will introduce how to adjust the impeller clearance of ZJ slurry pump. ...