Mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner and the parting surface. Since the BMC material cannot be decomposed, we are the first to use the materialless handle structure in China. Vacuuming structure, the mold temperature balance is consistent. The appearance and strength of the product are guaranteed.
Suitable for medium and low voltage insulators, high strength, high insulation, UV protection, aging resistance. Wear-resistant, fire-resistant, and a variety of color requirements. High sealing, high safety, low process and low cost.
We provide you with SMC Insulation andBMC Insulation
Aobang technology limited has a technical team engaged in many years of production and R&D ofbmc composite
Insulator Silicone Rubber is one of the most widely used materials for insulating electrical equipment due to its excellent electrical insulating properties. YF POWER, a leading manufacturer of electrical equipment, produces high-quality insulator properties silicone rubber ...
horizontal post insulator are used in electrical systems to provide insulation and mechanical support to the cross arm and conductor. They are typically used in low and medium-voltage applications and are one of the essential components of electrical systems. Cross Arm ...
The crimping process of polymer pin type insulators should pay attention to the crimping force, compression amount, pressing speed, holding time, etc. during crimping. Due to the cumulative error of the size of mandrel and fittings, the maximum error can reach 0.2mm. According ...
Plastic Mould Industry The industrial plastic injection mold is replacing metal products in many fields of industrial applications to meet the requirement of lightweight industrial equipment and cost-reduction. Green Vitality has accumulated many experiences over the years in ...
To increase the production efficiency, we need optimize the mold cooling system to shorten the cycle time. As a result, machining cost and time will be saved and the production efficiency increased. Green Vitality concerns a lot on mold cooling system and production stability. ...
If the weight of each fan blade is not balanced, large vibration, high noise, and large wear of the rotating shaft will occur during high-speed rotation, which not only seriously affects product performance, but also The lifetime will also be greatly reduced. Therefore, fan ...
Consumer electronics is very popular in our daily life. It consists of many different plastic parts, pcb boards, wires, battery and some metal parts. To produce the plastic components of consumer electronics, we need manufacture the plastic injection molds first. Consumer ...
The Three Part Syringe Plunger from PLUSLINK is a durable and easy-to-use device designed to help inject medication into the body accurately and safely. It is constructed from three separate parts made from medical-grade plastic, allowing for easy maintenance, cleaning and ...
It is designed for various types of three-part syringe barrel.including luer slip, luer lock and dual-structural syringe. (1ml, 2ml, 2.5ml, 3ml, 5ml, 10ml, 20ml, 25ml, 30ml, 50ml, 50ml Catheter Tip, 60ml Catheter Tip, 100ml, 150ml) It consists of three main components: the ...
LINKPLUS provide precision molds used in manufacturing of each components of the various syringes such as disposable syringe, Insullin syringe, safety syringe, AD syringe. Including barrel, plunger, gasket. It\'s customizable according to customer production need. Our syringe ...