Auto Parts Mould
Injection molding and pressure molding are the main methods. When designing the flow channel and parting surface, the cavity pressure should be as small as possible, the exhaust should be smooth, the discharge position, shape, and material flow direction should be fully considered, especially some small ribs. To do the active exhaust, there must be a overflow trough. Vacuuming structure, the mold temperature balance is consistent. The appearance and electrical performance of the product are guaranteed. It solves the problems of lightweight, leakage safety and aging of automobiles, reduces costs and improves product quality.
Auto Parts Mould List
BMCAuto parts
Aobang technology limited has a technical team engaged in many years of production and R&D ofbmc composite
SMC Auto Parts Description Auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. SMC Auto Parts Car Bumper Battery Box ...
Auto Part Mold With the vigorous development of the automotive industry, plastic auto part mold is also developing rapidly. 90% of auto parts are produced by injection molds, which is a huge market opportunity for plastic auto plastic parts manufacturers. Common large-size auto ...
Auto Bumper Mould The front and rear bumpers of the car are made of plastic, which not only maintains the protection function, but also has the characteristics of harmony and unity with the body shape, lightweight, and low fuel consumption. The plastic front moulding bumper ...
This is the Slide milling Nissan juke turning service enclosure machining machined aluminum motorcycle auto spare parts recently produced by us. It meets the requirements of ISO9001:2008. Specification: 68mm*86mm Raw material: AL6061-T6 Surface Treatment: clear anodizing ...
NDT Application: Eddy current hardness testing technology has been widely used in the detection of metal components in the automotive The eddy current technology is usually used to detect engine blade cracks, bolts, cracks in the screw holes, multi-layer structure of the ...
\"jacking oil pump auto back-flushing oil filter ZCL-1-450B Spare parts with COO/COM Dongfang Yoyik is specializing in the production and supply of spare parts of power plant steam turbine, generators, can provide from customized parts to finished factory product. The company ...
With the vigorous development of the automotive industry, plastic auto parts mould is also developing rapidly. 90% of car parts mould are produced by injection mold, which is a huge market opportunity for plastic automotive parts mold manufacturers. Common large-size car part ...
Auto Parts Mould Automotive Parts Mold features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any ...