ZECO is one of the professional gatevalve manufacturer
Gate Valve For Sale List By Form
According to the structural form, the gate valve can be divided into Wedge gate valve, through conduit gate valve, slab gate valve, and industrial gate valve. The structure difference is distinguished by the wedge, the wedge and seat of wedge gate valve are degrees, generally, 3 degrees, 5 degrees, the wedge and seat of through conduit gate valve are parallel, through the medium pressure from floating seat or wedge to seal
Gate Valve For Sale
The drive mode of the gate valve can be divided into manual, pneumatic and electric, gear operated and motorized. The choice of operation mode is mainly based on the requirements of clients. ZECO can configure the operated actuators and brands required by clients.
Gate Valve For Sale List By Material
When selecting the valve body material of the gate valve, the material should be determined according to the actual conditions of working conditions such as temperature, pressure & medium. Body materials of ZECO gate valves include, but are not limited to stainless steel, wcb, carbon steel, forged and cryogenic.
Gate Valve For Sale List By Size
The size of the pipe determines the size of the gate valve and the rate of flow required through the gate valve is considered first. ZECO international standard valve company manufactures the ball valve of smallest 1/2 inch, 2 inches, 3 inches, 4 inches, 6 inches, 8 inches, 12 inch and maximum 56 inches.we can providestainless steel gate valve price for you,such asgate valve 6 inch price
We can give you somegate valve manufacturers list,but choose ZECO as your professionalMotorized Gate Valve Suppliers,will be your best choice!
Gate valves are a major product in API 6D. Gate valve is divided into API 600 and ASME B16.34 according to API standard, which can be applied to low, medium and high-temperature pressure conditions. It basically covers the whole pipeline of petroleum, chemical and natural gas industry. Therefore, the proportion of gate valve in the industrial valve is the same as that of ball valve, which is a very important product.
The industrial gate valve is simple in structure and reliable in use. The wedge is closed and tightened slowly by the inclination and finally achieves the complete sealing condition. On the one hand, it depends on the professional design of technicians, on the other hand, it depends on the professional technology of production line personnel. Gate valve features a lot of, but on the pipeline is particularly important in the fully open position, is equal to the pipe size, meaning that theMotorized gate valve is installed directly under the state of full open section pipe, no resistance to medium, which is why the gate amount is so big, because there is no flow resistance and the dielectric saved the cost of the pipeline, with monthly is very large.
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves ...
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating ...
Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class ...
globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? ...
Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by ...
Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, ...
Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are ...
The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is ...