Through Hole Compact High Speed Slip Ring Connector for CNC Equipment Disc Slip Ring
Feature:
1.Gold alloy brush,Gold plated rings
2.Thickness is only 5mm
3.Max speed:250rpm
4.Hole size:31mm
5. low contact force per fiber and low contact wear rates
Through Hole Compact High Speed Slip Ring Connector for CNC Equipment Disc Slip Ring
Model Explanation:
JSR-PS028-4S-SP
Through Hole Compact High Speed Slip Ring Connector for CNC Equipment Disc Slip Ring
Installation Instructions:
Flange mounted:
Specifications of Through Hole Compact High Speed Slip Ring Connector for CNC Equipment Disc Slip Ring:
Operating Speed | 250 rpm |
Number of Circuits | 6 |
Voltage | 240 VAC/DC |
Current Rating | 10A per circuit |
Temperature Range | -20°Cto +80°C |
Contact Material | Gold to Gold |
Lead Size | 22# silver plated copper |
Lead Length | Standard 250 mm(9.843inch) |
Dielectric Strength | ≥500 VAC @50Hz, between each circuit |
Insulation Resistance | 100 MΩ @ 500 VDC |
Electrical Noise | 5mΩMin |
CERTIFICATES:
PACKAGING& SHIPPING
Q1: How long is your production lead time?
A: It needs 7 to 15 days for standard products, 10 to 20 days for simple customized products,
15 to 40 days for complex customized porducts.
Q2: What technical data should be provided for our customized slip ring model?
A: If you want to costomize the special slip ring model, you need provide details as below:
a.operatring speed(RPM)
b.the type of installation
c.outline size
d.channels(the No. of single wire besides cable)
e.rated voltage & current for power rings and signal rings
f.the signal type and related
parameters(very important)
g.operating temperature h.IP(sealing requirements)
If you have any questions, pls contact us without any hesitation.