Disc feeder is a traditional continuous feeding equipment for powder material and applicable to feed non viscous material. The suitable feeding material: powder, granular or small bulk materials such as coal powder, cement, clinker, limestone, clay, gypsum, slag etc. Install speed adjustment motor according to need, control feeding volume by adjusting the rotation speed of disc.
The lightness and excellent thermal conductivity of aluminum discs make them a high-quality material for making cookware, especially suitable for cooking environments that require rapid heating and uniform heat distribution, such as outdoor cooking or home use. Usually 1050, ...
Vitrified bond Diamond/CBN double disc performs grinding and lapping in one process using a fixed abrasive system which makes cleaning the work places quick that allows for a clean work environment. They are widely used for Auto parts, Mechanical seal parts, and air compressors ...
RIKEN RMC purple color AP50M uses special paper and abrasive grain and advanced technology, which make the product with the new appearance purple color. Advantages of AP50M Sanding Discs Our AP50M round sandpaper discs have a longer life than traditional dry paper. This product ...
Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated ...
The notched harrow disc is made of durable materials, which allows it to withstand the stresses of repeated use in demanding field conditions. The notches or serrated edges on the disc help to reduce the amount of soil and plant material that is dragged along with the disc, ...
Double disc cutter, also known as double disk, is a kind of 19 inch twin disc cutter with two cutter rings, which is mounted on the front and gauge area of the cutter head. It is mostly used to break soft rock with low uniaxial compressive strength (UCS≤70Mpa) and mixed ...
Aluminum Oxide Fiber Disc It is strong and has durable, long sanding life, high sanding performance. Suitable for grinding and polishing metal, non-metallic, wood, rubber, leather, plastics, stone, glass and other materials. As one of the leading fibre disc manufactures, our ...
This powerful small neodymium magnets measures 1/2\" in diameter, 1/8\" in thickness, with the pull force of 7.97 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The ...
Round Disc Shaped Ceramic Magnets The ceramic disk magnets made of iron oxide and strontium carbonate are ferrite magnet, also known as a ceramic magnet. Ceramic magnet discs are a part of the permanent magnet family, and known as the lowest cost, hard magnets available today. ...
Self Adhesive Neodymium (Rare Earth) NdFeB Disc Magnets These round coin-shaped magnets of different diameter and thickness have an self-adhesive layer attached on one pole. They are classified as 3M self-adhesive backed disc magnets, and the disc magnets are made of neodymium. ...