MT4-MT6 winding machine:
It can produce 4-6 pipes at the same time, saving floor space and improving production efficiency.
Main parameters and characteristics:
1. Diameter of pipe: DN250-DN500
2. Length of pipe: 6000mm-12000mm
3. Main shaft rotation speed: 130rpm/min
4. Winding trolley max speed: 59m/min
5. Yarn width: 150mm
6. Winding angle range: 45°~ 90°
7. Total installed capacity: 15KW
8. Equipment occupied area: 10000mm long and 4000mm wide.
9. Control System: Computer Control
CNC variable geometry 3 roll plate bending machine adopts the structure of oil cylinder down. The upper work roll of the wind tower bending machine is the main driving roll: the upper roll is driven by the hydraulic motor (one motor) through the planetary reducer, and the two ...
CNC variable geometry three roll plate rolling machine adopts the structure of oil cylinder down. The upper work roll of the wind tower bending machine is the main driving roll: the upper roll is driven by the hydraulic motor (one motor) through the planetary reducer, and the ...
Transformer manual coil winding machine Special equipment for distribution Transformer coils. The distribution Transformer is oblong or circular coil with a radius ≤ 500 radius ≤ 350, and it can satisfy the winding of amorphous alloy rectangular coil, and the copper wire ...
4. Main technical parameters Model VOL-260 VOL-300 VOL-400 VOL-500 Diameter range of windable eletromagnetic wire 0.5-1.5mm 0.5-2.6mm 0.5-3.2mm 0.5-3.2mm Min inner diameter of winded coils 30mm 50mm 60mm 60mm Max outer diameer of winded coils 260mm 350mm 450mm 550mm Max height ...
Description The equipment is mainly composed of: main box, base, automatic wiring rack, interlayer insulation device, electrical control, etc. 1、This machine adopts hard gear gear mechanical transmission system, with high efficiency and less than 70db 2、The motor has an ...
The equipment is mainly composed of main box, base, rear tailstock and electrical control. Application: High and low voltage power transformer winding machine is suitable for winding of reactors, high and low voltage coils of power transformers and other similar coils. Feature ...
Ningbo Dingming Machinery Manufacturing Co.,Ltd, founded in the year of 2000, is a comprehensive researcher, manufacturer and exporter series of thread winding machines,such as cone winders, cone and cheese winders,bobbin winder, prewound bobbin winder,king spooling winders, ...