Two-Axis Temperature Controlled Turntable

Two-Axis Temperature Controlled Turntable
	Inner spindle（pitch）	Outer spindle（azimuthal）
Function	This device has the function of position and rate, it can provide the benchmark of precise single and two axis positioning and rate for the tested load, it’s used for static testing and calibration of inertial original components, inertial navigation systems. The temperature box provides the test environment for the tested load with low and high temperature.
Axis Orientation	Vertical（TU）
Payload Weight	5-40kg
Dimension of Table Surface	200-500（mm）
Material of The Table	Stainless Steel
Table flatness	0.015mm
Table Wobble	0.02mm
Perpendicularity of Two-Axis	±3″
Motion Error of Main Axis	±3″	±2″
Angular freedom	Continuous, Unlimited	Continuous, Unlimited
Position Accuracy	±3″	±2″
Position Resolution	0.5″	0.5″
Rate Range	± 0.005°/s~±400°/s	± 0.005°/s~±600°/s
Rate Resolution	0.001°/s	0.001°/s
Peak Acceleration	200°/s2	300°/s2
Conductive Slipring	40 rings/3A
Remote Control Interface	RS232/RS422
Inside Dimension	600mm×700mm×800mm（L×W×H）
Temperature Range	-55℃+90℃
Temperature Stability	≤±0.5℃
Temperature Uniformity	≤±2.0℃
Temperature Deviation	≤±2.0℃
Rate of the Temperature Change	≥2.0℃/min
Running Noise	≤65dB（1m in front of the box）
Other	The remote control interface can be adjusted by user’s requirements； The quantity of conductive slip ring can be adjusted by user’s requirements； The dimension of table can be adjusted by user’s requirements； Technical parameter can be adjusted by user’s requirements.