Description
FeCrBSi is a solid thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping techniques. FeCrBSi is used in a wide variety of high wear applications, anti-skid surfacing applications and corrosive environments. It can Equivalent to Tafa 95MXC, Armacor M.
Applications
Boiler Tubes & Tube Shields,Yankee Dryer Rolls ,Anti-Skid ,Fan Blades ,Drill Collars.
Product Details
Chemical composition
Grade | Chemical composition(%) | ||||
FeCrBSi | Cr | Mn | Si | B | Fe |
27~29 | 1.5-2.0 | 1~2 | 3~4 | Balance |
Physical Properties
Grade | Density | Melting point |
FeCrBSi | 7.3g/cm3 | 1530 °C |
Typical Deposit Characteristics
Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Machilityineab |
HRC 55-60 | 6000 psi | 10 lbs/hr/100A | 0.7 | Good |
Sizes & Packaging:
Diameter | Packaging | Wire Weight |
1/16" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Description FeCrBSi is a cored thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping ...
Description Tung Carbide is a cored wire specifically designed for arc spray systems. It is a titanium and tungsten carbide alloy in an amorphous matrix. Tung Carbide produces a hard, abrasive and corrosion resistant coating, with a service environment of up to 1000° F. Tung ...
Description Monel 400 thermal spray wire with a high strength composition of nickel and cooper alloy. It is specifically designed for spraying in arc spray and flame spray systems. It can produces well-bonded coatings with excellent machineability. It is highly resistant to ...
Description Alloy 276 is a high purity nickel-chrome-molybdenum wire , It is designed for arc spraying. It produces dense, well-bonded coatings with good resistance to corrosion, and stress cracking in caustic mediums. Alloy 276 exhibits good abrasion and metal to metal wear ...
Description Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces an amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. The inclusion of 2.0% aluminum in the formulation results in extremely ...
Description Tung Carbide is a cored wire specifically designed for arc spray systems. It is a titanium and tungsten carbide alloy in an amorphous matrix. Tung Carbide produces a hard, abrasive and corrosion resistant coating, with a service environment of up to 1000° F. Tung ...
Description Stainless steel 18/5 wire specifically designed for arc spraying. It produces dense, well-bonded coatings with excellent machinability and wear and corrosion resistance. SS 185 is widely used for machine element repair, dimensional restoration and wear resistance ...
Description FeCrBSi is a cored thermal spray wire used for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1700° F. High chrome like finishes can be obtained by typical grinding and lapping ...