Jinhong mold components Ejector series Two-Stage Ejecors E1860-2

FOB Price: USD $678.00 / Piece
Place Of Origin: Dongguan

Minimum Order: 1

Packaging: 1set

Delivery: 7 Days

Installation and use instructions:

1.Machine the mounting holes on the mould according to the deepening dimension drawing;

2.Calculate the stroke precisely, and intercept the length of the flange ring and the mandrel. Note that the ejection stroke cannot be adjusted after installation;

3.Fix the flange on the movable mould baseplate by using a hexagonal socket head cap screw, install the middle thread sleeve on the ejector plate B, and fix the central mandrel on the ejector plate A;

4.tap the internal thread at the tail of the mandrel to connect with the central mandrel of the injection molding machine. The thread size varies with the model;

5.Conduct the fit function test to check whether the movement of all parts for the secondary ejection mechanism is smooth and the stroke is consistent. (It is recommended to test on the die spotting machine or the injection molding machine. Do not use the crane.)

6.It is necessary to accurately install (usually install one ejection device on a mould) and accurately calculate the stroke, otherwise the product will be easily damaged.

7.If the mould is required to be repaired, remove the mould clamping device and then conduct the subsequent operation.

More information：https://www.jhtoolshop.com

Country: China (Mainland)
Business Type: 生产厂家,贸易公司,分销商/批发商
Market:新兴市场,美洲,亚洲,欧洲,欧洲联盟,大洋洲,G20,中东
Founded Year:2002
Address:NO.11,Lizhidun Street, Liheng Village, Qingxi Town
Contact:lan xiao

Jinhong mold components Ejector series Two-Stage Ejecors E1860-2

more images of Jinhong mold components Ejector series Two-Stage Ejecors E1860-2

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Jinhong Plastic Hardware Mould Fittings Co.,ltd
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters : 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

Jinhong mold components Slider series DTK

Jinhong mold components Ejector series Sling Ejector Pin E3202

Jinhong mold components Ejector series Sling Ejector Pin E3200

Jinhong mold components Ejector series Two-Stage Ejecors E1860-1

Jinhong mold components Ejector series Two-Stage Ejecors Ejector series

Jinhong mold components Accelerated ejector AEP TWO-STAGE EJECTRS

Various clamping devices are provided with an ejection device. The ejector unit can be divided into mechanical ejection, hydraulic ejection and pneumatic ejection. The mechanical ejection also has a top rod ejecting, a top tube ejecting, and a pushing plate ejecting. Type ...

Jinhong Plastic Hardware Mould Fittings Co.,ltd

Jinhong Plastic mold components Ejector series Accelerated ejector AEP

Stroke for all units=5/8 maximun kee pinion lubricaed Do not use with pooosing spring pressure Accelerated ejector dimensions Type A B C D E F G H J K L M N P Q AEP-10 Drive type needle +.000 -.002 2.125 +.000 -.002 1.062 +.000 -.002 1.125 5/8 9/16 1.600 1.100 1/2 ±0.002 .125 ...

Jinhong Plastic Hardware Mould Fittings Co.,ltd

Jinhong Plastic mold components Ejector series Plate accelerator EP

Simple assembly vill be able to achieve a good speedup. Small installction space,optimization of mold structure. The sloping top self-lubricating guide seat assembly is simple in design, economical and practical, and takes up space. It can be directly installed in the processing ...

Jinhong Plastic Hardware Mould Fittings Co.,ltd