Model	SXR-RP13CX	Main Motor Power	55Kw,30Kw
Trademark	FRIEND	Total Motor Power	93.42Kw
Working Width	40-1300mm	Working Air Pressure	0.55MPa
Working Thickness	3-80mm	Compressed Air Consumption	0.12m³/min
Working Length	≥750mm	Air Speeding of Dust Suction	25-30m/s
Feeding Speed	2-30m/min	Air Volume of Dust Suction	23000m3/h
Sanding Belt Speed	22m/s,20m/s	Overall Dimension	2900×2700×2100mm
Sanding Belt Size	1330mm×2500mm	Net Weight	7000Kg

The sander is primarily designed for calibrating and polishing of plywood, blockboard, wood plastic board, particleboard, MDF board, etc.
1. The body of the sander is well welded by the heavy plate, steel-beam and angle steel frame, which improves the stability of the machine.
2. The precise dynamic balance test of the contact rollers, pinch rollers, and tension rollers make the sanding result precise.
3. The contact heads are capable of individual height adjustment via eccentric cams.
4.The polishing pad can be adjusted by hand wheel according to different demands.
5. The electronic pneumatic abrasive belt oscillation system is used to control the sanding belt move safely and stable around the contact roller.
6. The sander adopts stepless speed regulation motor for its feeding system, which ensures stability and high efficiency of feeding.
7. The sander is equipped with a conveyor belt type feed drive system which makes the feeding more stable and the sanding result more precise.
8. The sander is equipped with an automatic brake system on the sanding unit, which can shut down the machine immediately in an emergency.
9. Brush roller cleans the panel after sanding.