Tobee® 40mm Warman Vertical centrifugal slurry pump
Product Quick Detail
- Place Of Origin
- China
- Brand
- TOBEE PUMP
- Minimum Order
- 1
- Product Name
- Tobee® 40mm Warman Vertical centrifugal slurry pump
- Packaging
- WOODEN CASE
- Delivery
- 7Days
Specifications
Capacity: 7.2-29m3/h
Head: 4-28.5m
Speed: 1000-2200rpm
Eff.: 40%
Power: Max.15kw
Handling solids: 12mm
Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc
• Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings.
• Large Particle - Large particle impellers are also available and enable passing unusually large solids.
• Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft.
• Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures.
• Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered.
• Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
• Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
| Tobee | Warman | Power P (kw) | Capacity Q (m3/h) | Head H (m) | Speed n (r/min) | Eff. η (%) | Impeller dia. (mm) | Max.particles (mm) | Weight (kg) |
| TP(R)40PV | 40PV-SP(R) | 1.1-15 | 7.2-29 | 4-28.5 | 1000-2200 | 40 | 188 | 12 | 300 |
| • Mining | • Sump drainage | • Coal prep | • Mineral processing |
| • Mill sumps | • Tunnel | • Tailings | • Chemical slurries |
| • Ash handing | • Paper and Pulp | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Sump Dredging | • Mill grinding |
| • Alumina Industry | • Power Plant | • Potash Fertilizer Plant | • Other industries |
- Country: China (Mainland)
- Business Type: Manufacturer
- Market:Africa,Americas,Asia,Emerging Markets,Europe,European Union,G20,Middle East,Oceania
- Founded Year:1987
- Address:High-tech Zone, Shijiazhuang City 050000, China
- Contact:Donna Zhang
You may also like
Other products from Hebei Tobee Pump Co.,Limited
Relate products of Tobee® 40mm Warman Vertical centrifugal slurry pump
40PV-SP Vertical Slurry Pump is ideal for a variety of submerged suction pumping applications. The vertical slurry pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered ...
Tobee® Slurry pumps are recommended for pumping liquids containing small or large suspended solids. They are designed for continuous pumping of highly abrasive and corrosive slurry. The 4x3C-AH pumps Tobee® 4-3C-AH Slurry Pump for Cleaning coal thickening cyclone, Cyclone ...
Tobee® China Centrifugal Dewatering Slurry Pump are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials ...
Tobee® 6x4 inch DAH Metal Lined Slurry Pump Tobee® Slurry Pump Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Generally, the material of slurry pump cover plate less than 6/4 ...
Back Liner SP20041A05 is used for 200SV-SP Vertical Slurry Pump. Slurry Pump Frame Plate Liner Insert is a wear part of slurry pumps, It is also called for slurry pump back liner based on locating position in slurry pump structure, Frame plate liner insert forms a pump chamber ...
Tobee® 6x4 inch DAH Metal Lined Slurry Pump Tobee® Slurry Pump Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Generally, the material of slurry pump cover plate less than 6/4 ...
C2110-A05A High Chrome Alloy Volute Liner is one of the wear parts for 3x2 C-AH Centrifugal Horizontal Slurry Pump. Slurry Pump Volute Liners C2110 are interchangeable with 3/2 CAH slurry pump volute lines. It is also one of wetted parts for slurry pumps. It forms a pump ...
Tobee® Mission 2500 Supreme Centrifugal Pump has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in ...
Expeller B028 The B028 expeller The standard material of the expeller of the slurry pump is generally cast iron or ductile iron, and it can also be made of A05 as the wetted part material according to customer requirements. In recent years, most customers prefer A05 high-chrome ...
1.5/1B-AHR Rubber Lined Slurry Pump is the standard heavy duty slurry pumps which designed with rubber lined. It is more suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges. The rubber lined slurry pumps typically used in ...
