DYTN Type single - double - side electric hydraulic plow type feeder

Introduction of DYTN single - side electric - hydraulic plow type stripper

DYTN type single-side electro-hydraulic plow type stripper is suitable for uniform unloading of belt conveyors with a bandwidth of 500-1800.1800 stripper is specially designed by our company to fill the blank in China.The electric hydraulic plow type stripper takes the electric hydraulic push rod as the power source, drives the frame forward, completes the plow head falling, and supports the flat roller, the lower edge of the plough blade and the adhesive tape, completes the unloading.After completion, the frame retreats, the plow is raised up, the deformation roller restores the groove shape, the tape restores the groove shape, and the material passes smoothly.

Characteristics of DYTN single - side electric - hydraulic plow type stripper

1. The plow can be single or double.The front plow is made of chromium-nickel stainless steel and the rear plow is made of polymer polyethylene sheet. The front and rear plough knives can be replaced. This structure can not only unload the materials, but also protect the tape.

2. The furrow locking device has been greatly improved.The lock is reliable, the plow will not lift or shake when working, and can adjust the height of the plow to the appropriate position close to the tape, no leakage phenomenon.

3. The drive device adopts electric hydraulic push rod.Solid mechanical and electrical integration, the circulating oil road is fully sealed structure, can work under harsh environment, according to user needs can provide electric hand electric two-sided knife electric hydraulic push rod or mechanical self-lock type electric hydraulic push rod.

4. The deformation idler group is used to synchronize with the electro hydraulic push rod working machine. The push rod operates in a working cycle.

5. The motor protection level is determined according to the environment, and the flammable and explosive condition adopts IP54 motor.