Type: MSH-110, MSH-120, MSH-130, MSH-210, MSH-230
Brief introduction :More Superhard provides polyurethane (PU) polishing pads. Abrasive fillers include cerium and zirconium, some pads do not have abrasive filler.
,Application: glass, LED, precision optics
Application of polyurethane (PU) polishing pad :
polishing and finishing of glass, LCD/LED substrates, precision optics, hard disk, metal and semiconductor wafer surfaces.
Size of polyurethane (PU) polishing pad :
Shape | dimensions (inches / mm) | |
rectangle | 23 x 55 inches | 584.2 x 1397 mm |
36 x 71 inches | 914 x 1803 mm | |
square | 42 x 42 inches | 1066 x 1066 mm |
52 x 52 inches | 1320 x 1320 mm | |
roundness | φ 26 inches | 660 mm |
φ 32 inches | 812 mm | |
φ 38 inches | 965 mm | |
φ 52 inches | 1320 mm | |
Custom sizes, shapes and configurations are available.Email: sales@moresuperhard.com |
Thickness for polyurethane polishing pad:
standard thickness for PU polishing pads ranges from 0.020 inches (0.508 mm) to 0.20 inch (5.08 mm)
Model | filler |
average density
G / cm³ (Ib / ft³ ) |
Average hardness
shore - A |
application area |
MSH- 110 | cerium oxide | 0.42 (26) | 78 |
Glass, Crystal, Metal,
Ceramic |
MSH- 120 | cerium oxide | 0.43 (27) | 78 | Glass, Crystal |
MSH- 130 | cerium oxide | 0.35 (22) | 66 | Glass, Crystal |
MSH- 210 | zirconium oxide | 0.59 (37) | 90 | glass, metal , ceramic |
MSH- 230 | zirconium oxide | 0.40 (25) | 74 | Glass, Crystal |
MSH- 240 | zirconium oxide | 0.57 (36) | 88 | Glass, Crystal |
MSH- 410 | none | 0.51 (32) | 88 | glass, metal , ceramic, crystal |
MSH- 420 | none | 0.77 (49) | 96 | glass, metal , ceramic, crystal |
Pressure-sensitive adhesives (PSA) backing: adhesive backing is available on all types of pads. PSA backing ranges from high-holding to low tack/easy release.
Grooving :grooves improve pad performance by reducing excess slurry from the pads surfaces. More Superhard pad in offered in a variety of groove configurations . The depth of a groove is usually half of the pad thickness, only pad with thickness of more than 2 mm can be grooved . Groove width is usually 2 mm, and the island size is usually 16*16 mm.