The mono-crystal diamond tools can achieve excellent cutting edge by grinding . And the surface finish can reach 0.025 micron or higher. Mono-crystal diamond tools are often used for machining high - precision parts with mirror finish.After processing,generallydo not need to grinding,polishing and other subsequent processes.
1.High hardness and wear resistance
2.It will be not easily sticking the cutter
3.High efficiency and low cost
4.To obtain a higher surface finish
When processing non-ferrous materials (such as silicon-aluminum alloy), it is generally not processed by single crystal diamond tools (SCD), but processed by a high life polycrystalline diamond tool (PCD).
However, in some cases, when the surface roughness parameters are required to be severe, the single crystal diamond tool (SCD) should be used for processing. For example, when a polycrystalline diamond tool (PCD) is used to turn an aluminum piston, the surface roughness Ra can reach 15 to 50 μm, and the surface roughness can be up to Ra4 μm by using a single crystal diamond tool (SCD)
If you have any questions, please contact us
Details: The mono-crystaldiamond Advantages of MCD cutting tools * High hardness and wear resistance * It will be not easily sticking the cutter * High efficiency and low cost * To obtain a higher surface finish Types of Mono crystal diamond cutting tools * Other types and ...
Single Crystal Diamond SCD ND Tools 1.Application:also used for non-ferrous metals(copper,aluminium,zinc,titanium etc),organic board for achieve the ultra-precision mirror surface milling andused in ultra precise mirror turning, milling and cutting etc 2.It can be specially ...