Spherical Dished Head for Boiler
Product Quick Detail
- Place Of Origin
- ChinaDalian
- Minimum Order
- 1
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
锅炉用球形碟形头它可以形成不同的形状和规格的碟头综合技术，从Φ325*thk 8到Φ10000*thk 50。定金拥有7台液压机，其中2台为1000吨，1台为2000吨，1台为8000吨，1台为16000吨。
定金目前已制造出以下特殊型号的船头：法兰斜锥头、凸缘小锥头、法兰喇叭头、炉用容器头、帽型容器头、适用于潜艇和特种回转体的船头。
- Country: China (Mainland)
- Business Type: 生产厂家
- Market:大洋洲,非洲,美洲,新兴市场,亚洲,欧洲,欧洲联盟
- Founded Year:2003
- Address:No.6 Youquan Road, Zhanqian Sub-district, Jinzhou District, Dalian City, PRC
- Contact:Gigi Tan
You may also like
Other products from Dingjin General Machinery Co., Ltd.
Relate products of Spherical Dished Head for Boiler
With cold press forming, dished heads can be formed with inner diameter ranges from 200-3200mm, 50mm pitch up to2000mm, and 100mm pitch fro above ...
Cold spinning is used to fabricate non-standard dished heads or very larger dished ends in diameter. By this forming way, dished heads can be formed with inner diameter ranged from 400-8000mm and plate thickness can be up to 40mm.The diameter even will be up to 9000mm if height ...
Hot press forming is used to fabricate dished heads when their plates are very thick or material is special materials. While the thickness forming range is more than other forming way or we must use this forming due to material grade restriction. The diameter range is up to ...
Hot spinning forming is used to fabricate dished ends while our has no tooling for hot press.This forming is very economic and can be formed as client design without new tooling The max thickness is 80mm and diameter can be up to ...
Segment forming is used to fabricate very larger, specially shaped dished heads, which can\'t be fabricated via press or cold spinning forming way. Finally dished heads will be either segments shipment or assemble and welded single piece shipment. The diameter is no limit but ...
Segment forming is used to fabricate very larger, specially shaped dished heads, which can\'t be fabricated via press or cold spinning forming way. Finally dished heads will be either segments shipment or assemble and welded single piece shipment. The diameter is no limit but ...
Hot spinning forming is used to fabricate dished ends while our has no tooling for hot press.This forming is very economic and can be formed as client design without new tooling The max thickness is 80mm and diameter can be up to ...
Hot press forming is used to fabricate dished heads when their plates are very thick or material is special materials. While the thickness forming range is more than other forming way or we must use this forming due to material grade restriction. The diameter range is up to ...
Cold spinning is used to fabricate non-standard dished heads or very larger dished ends in diameter. By this forming way, dished heads can be formed with inner diameter ranged from 400-8000mm and plate thickness can be up to 40mm.The diameter even will be up to 9000mm if height ...
With cold press forming, dished heads can be formed with inner diameter ranges from 200-3200mm, 50mm pitch up to2000mm, and 100mm pitch fro above ...
