English name: 0.6/1kv Aluminum Core Steel Tape Armored Cable
Product Standards
The product according to GB/T12706 " rated voltage 35KV and below copper, aluminum plastic insulated power cables " standards, while also based on user needs by the International Electrotechnical Commission standard IEC, British Standards , the German standards and U.S. standards.
Scope
This product is suitable for power frequency rated voltage 0.6/1KV and what distribution networks or industrial installations in fixed installations.
Use Features
Rated power frequency voltage U0 / U is 0.6/1KV (Low Voltage Power Cable
Allow long-term maximum conductor temperature is 70 ℃.
Short (the longest duration of no more than 5s) maximum allowable temperature of the conductor :
Conductor cross-section ≤ 300mm2-160 ℃;
Conductor cross-section > 300mm2-140 ℃.
The ambient temperature should not be less than 0 ℃.
Cable bend radius of not less than 20 times the cable diameter.
Description
Type | Description | No. of cores |
Nominal cross section of conductor |
VV22 |
Copper conductor PVC insulation Steel Tape Armoured PVC outer sheath Power Cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm² |
VV23 |
Copper conductor PVC insulation Steel Tape Armoured PE outer sheath Power Cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm² |
ZA-VV22 ZB-VV22 ZC-VV22 |
Copper conductor PVC insulation Steel Tape Armoured flame-retardant Power Cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~630mm² |
NH-VV22 |
Copper conductor PVC insulation Steel Tape Armoured fire-resistant Power Cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm² |
Duplex 2.0/3.0mm fiber optical cable is a zip cord fiber optic cable paralleled two 0.9mm simplex cables which is wrapped with steel tape. This cable is mainly used for termination assembling. Description of Duplex Zipcord Tight Buffered Armored Fiber Optic Cable GJSFJV 0.9mm ...
2 core spiral steel armored Indoor fiber optic cable Indoor cable. multi fiber, Φ900μm or Φ600μm tight buffer , spiral steel armor, two layers of Kevlar yarn with double sheath (LSZH/ PVC/ OFNR Jacket) Cable construction details : Technical Parameters: Out Diameter(MM) 2.0 ...
Bow-type FTTH put in side with 2 KFRP, the optical fiber unit positioned in the centre. Two parallel strength member are placed at the two sides and have aramid yarn to protect the inside FTTH, ourside sCable construction details ...
1.34 years experience on cable/wire manufacture equipment 2.Industrial chain advantage:Located in Hebei province in Huabei area,one of the most important heavy industry belt of China,HongQi`s production get: --better quality --less cost 3.As both manufacture and trader,we can ...
Cable Type (Increased by 2 fibers) Fiber Count Cable Diameter mm Cable Weight kg/km Tensile Strength Long/Short Term N Crush Resistance Long/Short Term N/100mm GYTC8S/A 2 ~ 30 2 ~ 30 9.5 x19.1 160.0 2000/6000 300/ 1000 GYTC8S/A 32 ~ 36 32 ~ 36 10.1 x19.7 170.0 2000/6000 300/ ...
In the GYTA cable, single-mode/multimodefibers are positioned in the loose tubes,the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. An APL/PSP is applied around the core. Which is ...
1) The type of this fiber with single-mode G652 G655 G657 with a loose tube which is made of high modulus plastic .there is used a water-resistant filling compound for filling. 2) the center used a steel wire locates as a metallic strength member .for some cable ,a steel wire ...
1) The type of this fiber with single-mode G652 G655 G657 with a loose tube which is made of high modulus plastic .there is used a water-resistant filling compound for filling. 2) the center used a steel wire locates as a metallic strength member .for some cable ,a steel wire ...