Butterfly valve Wafer type -20 Centigrade
1) Standards:
1 | Design Standard conform to: | MSS SP-67M API609, EN593 |
2 | Connection flange conform to: | DIN PN10/16/25 ANSI B16.1, BS4504, ISO PN10/16, JIS B2212/2213, BS 10 Table D, BS10 Table E |
3 | Top flange conform to: | ISO5211 |
4 | Face to face conform to: | API609, ISO5752 series 20, BS5155 |
5 | Test standard conform to: | API 598 |
2) Design Characters:
1 | Rubber backed seat with stable valve torque. |
2 | Grooved sleeve design to achieve stable pisitioning |
3 | Simple construction, small in size, light in weight. Easy disasembling, installation and maintenance. |
4 | Minimized operating torque. Lewer, gear, pheumatic and electric actuators can be chosen. |
5 | Special design, high flow rate and low flow resistance. |
6 | Suitable madium: water, sewage, sea water, air, steam, foof, medicament, oils, acids, alkais, salts etc. No leakage under the rated pressure. |
3) Performance:
Nominal Diameter: | Non-backed: | DN50-DN300 |
backed: | DN50-DN300, DN350-DN1200 | |
Nominal Pressure PN(mpa): | 1.0, 1.6, 2.0, 2.5 | |
Testing pressure (water) Ps(MPa) | Body seat: | 1.5 times rated pressure |
Seat test: | 1.1 times rated pressure |
3) Material List
No. | Parts Name | |
1 | Body | Cast iron/Ductile iron/ Stainless steel/Carbon steel |
2 | Disc | AI-Bronze/Monel/CF8M/WCB/Ductile Iron |
3 | Pin | SS316/SS316/SS304 |
4 | Seat | EPDM/PTFE/Buna/Hypaton/Viton/Neoprene |
5 | Stem | Cr13/SS 416/SS316/Carbon Steel |
6 | Bushing | P.T.F.E./Lubricating |
7 | O-ring | EPDM/Bunal/Hypalon/Viton/Neoprene |
Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing them to withstand higher pressures than Class 150 valves. They are commonly used in industries such as oil and gas, petrochemical, power generation, and refining. Class 300 valves ...
Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000 pressure-rated ball valve that is small and light. It works best in applications where the temperature range is between -20°F (-29°C) and 450°F (232°C). What Is The Typical Operating ...
Class 2500 valves can be used for both on-off and throttling applications. The specific valve type and design will determine their suitability for a particular application. Gate valves class 2500 are often preferred for on-off service, while globe valves class 2500 or class ...
globe valve class 150 is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at 25 ºC, but only 166 bar at 250 ºC. However, in Carbon Steel A105, it can work up to 255 bar at 25ºC and only 209 bar at 250ºC. What Are The Key Features Of Class 1500 Valves? ...
Class 125 valve is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal ...
Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check valve 8 is composed of a valve cover and a valve body, and there is a valve in the valve body, and the liquid flow is controlled by ...
Check Valve 50mm is a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline pressure. The 50mm brass non return valve is light, compact, and easy to install, and is suitable for flow control of liquid, gas, ...
Type 2 22kw Charger Charge-Uni commercial AC charging pile features an energy-efficient output of up to 32A and a power output of 22kw. The protection level has reached to IP55. Details of Type 2 22kw AC Charger Advanced Technology Advanced MID technology makes more accurate ...
Model: YTST-021 YTST-041 Main Parameters: Temperature shock range:-55℃ ~+150℃ Test time: 10 mins Temperature transfer time: About 30s Test mode: specimen be put into a liquid with different temperature Description of Liquid Thermal Shock Chamber. Liquid to liquid thermal ...