Kelly Valve also named Kelly Cock/Drill Pipe Safety Valve allowing free passage of drilling fluid without pressure loss. The valve can be used as a dill pipe safety valve or upper Kelly valve to control blowout pressures, or as a lower Kelly Valve to prevent loss of drilling fluid when the Kelly is disconnected. It has a pressure rating of 5,000psi or 10,000psi or 15,000psi
Specifications
Kelly valve is a manually operated ball type drill stem valve; it is divided into upper Kelly valve and lower Kelly valve.
Kelly Valve features:
The sealing principle for Kelly valve is that the ball is positioned and provided with proceeding stress by the lower seat supported by spring load and a close seal between ball and ball seat is provided.
During normal drilling operation, the hole is kept unblocked by turning the stem to be “on” position; In case of kick or blowout, turn the operating stem to be “off” position to close off the internal bore of drill string, the kick or blowout accident is avoided due to a high pressure sealing situation between ball and ball seat.
When ordering please specify:
Upper or Lower type;
Tool OD;
Working Pressure: 5,000 / 10,000 / 15,000 PSI;
Tool connection.
Specifications - Upper Kelly Valve
Model | O.D. (mm) | Thread connection (LH) | I.D. (mm) | Max.sealing pressure(Mpa) |
CS 146 | 146 | 4 1/2 REG | 50 | 68.6 |
CS 200 | 200 | 6 5/8 REG | 76.2 | 68.6 |
Specifications - Lower Kelly Valve
Model | O.D. (mm) | Thread connection | I.D. (mm) | Max.sealing pressure(Mpa) |
XS105 | 105 | NC31 | 41.3 | 68.6 |
XS121 | 121 | NC38 | 50 | 68.6 |
XS127 | 127 | NC38 | 50 | 68.6 |
XS165 | 165 | NC46 | 61 | 68.6 |
XS178 | 178 | NC50 , 5 1/2FH | 71.4 |
68.6 |
DL-3 electric air heater is consists of 7 parts: electric heater + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After convert electrical ...
DL-1 electric air heater is consists of 4 parts: stainless steel electric heating finned tubes + insulation box + fan + control system. The electric heating groups start sequentially to convert electrical energy into heart. And heating the fresh air entering the box at a ...
ZL-3 steam air heater is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system.It is specially designed for supporting ...
ZL 4. Advantages/features 1. Simple structure, beautiful appearance, low cost 2. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 3. Electric steam valve controls the amount of ...
TL-3 burning furnace is consists of 8 parts: natural gas burner + inner tank + insulation box + fan + fresh air damper + waste heat recovery device + dehumidification fan + control system. It is specially designed for supporting downflow drying room/heating rooms. After fully ...
TL-1 burning furnace is consists of 5 parts: natural gas burner + inner tank + insulation box + fan + control system. The burner forms a high-temperature flame after full combustion in the high-temperature resistant inner tank, these flame mixes with the cold or recirculated ...
Product Description Kelly valve is a manually operated ball type drill stem valve; it is divided into upper Kelly valve and lower Kelly valve. The upper Kelly valve is connected between lower end of swivel and upper end of Kelly; the lower Kelly valve is connected between upper ...
Kelly valve is a manually operated ball type drill stem valve; it is divided into upper Kelly valve and lower Kelly valve. The upper Kelly valve is connected between lower end of swivel and upper end of Kelly; the lower Kelly valve is connected between upper end of drill pipe ...
Upper Kelly Valve The lake Kelly Valve is also available with left-hand threads for use as an upper kelly cock. When used between the kelly and swivel, it provides a positive means for shutting off flow in the drill string at any time. The inline body design will not hang up on ...