Model | 635# | 630# | 625# | 620# |
Appearance | white | white | white | white |
Mixing proportion of curing agent (%) | 5% | 5% | 5% | 5% |
Operating time (mins 25 0C ) | 40~70 | 60~90 | 40~70 | 30~50 |
Curing time(hours 25 0C) | 4~7 | 5~7 | 4~7 | 3~5 |
Hardness (A°) | 35±2 | 30±2 | 25±2 | 20±2 |
Viscosity (Mpas -25 0C) | 30000~38000 | 27000~32000 | 17000~19000 | 12000~14000 |
Tensile-strength(Mpa) | ≥4.50 | ≥4.2 | ≥3.2 | ≥2.8 |
Tear-strength (KN/m) | ≥30 | ≥30 | ≥27 | ≥32 |
Elongation-break(%) | ≥420 | ≥440 | ≥440 | ≥420 |
Linear Shrinkage (%) | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 |
Free samples, hotline call herry:+86 18938867549
Email Address: 2355542567(alt)qq(dot)com
Tel: +86 -0755-89212380
FAX: +86-0755-89948030
Website: http://www.szrl.net
http://www.jenova-silicone.com/
E-Catalogue: http://le-marketeur.com/Silicone-Rubber/E-Catalogue2013.swf
Silicone rubber is a kind of elastic material, which is widely used in industry and family. It has become an important part of our life. Meanwhile, silicone moldings are becoming more and more important in the world because it is widely used in a variety of industries like ...
Packson\'s state-of-the-art facilities consist of a 1000㎡ certified clean room, which is equipped with 14 sets of Liquid Silicone Rubber (LSR) injection machines. This enables Packson to produce up to 50 million medical-grade LSR components per year, ensuring that clients\' ...
GA-90*1A/B series platinum catalyzed silicone mold making operates easily, A:B: mix evenly according to 1:1 ratio, product transparency is good, suitable for platinum vulcanization. The production of medical and health products needs to be treated by secondary vulcanization at ...
Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process : Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of ...
Silicone rubber injection molding has more than a half-century history since the late 1970s. There are two molding ways of silicone rubber injection molding process: Liquid Silicone Rubber Injection Molding (LSR) and Solid Silicone Rubber Molding. There are thousands of ...
SiSiB® HR0100 is general purpose heat cured elastomer for molding. Technical Data Product HR0130 HR0140 HR0150 Appearance Translucent Translucent Translucent Hardness (Shore A) 30+/-2 40+/-2 50+/-2 Williams Plasticity 130+/-20 160+/-20 215+/-24 Tensile Strength (MPa) Min. 4.0 ...
Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%) HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400 HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 ...
1,Silicone Rubber For Architectural Decorations mold Silicone Rubber For Architectural Decorations mold is very suitable for making silicon stone mold. It is featured with extremely low shrinkage, good fluidity and resistance to many kinds of chemicals; This material do not ...
HY-901with the advantages ofhigh temperature resistance, abrasion resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining. The ...
HY-530is a kind of room temperature vulcanized silicone rubber incondensationtype.It’sgenerally named astwopart silicone rubber ,Part A is a flowable liquid, part B is the curing agentor catalyst . It’s mainly used for manual model design mold making . HY-530silicone ...