Masks Universal Tensile Strength Tester

Minimum Order: 1

Place Of Origin: china

Packaging: Packed by solid wooden case;

Delivery: 7 Days

Introduction

The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration mechanism, and drives the lead screw pair to load after deceleration. The electrical part consists of a load measuring system and a deformation measuring system. All control parameters and measurement results can be real time displayed on the LCD screen. And it has overload protection, displacement measurement and other functions. It can used for a variety of textiles and automotive interior materials tensile strength, tensile break elongation (or elongation rate) test. It can also be used for zipper, leather strength test.

Application

It can used for a variety of textiles and automotive interior materials tensile strength, tensile break elongation (or elongation rate) test. It can also be used for zipper, leather strength test.

Standards

GB/T 3917.2 Textiles-Tear properties of fabrics-Part 2 Determination of tear force of pants shaped test specimens (single slit)

GB/T 3917.3 Textiles-Tear properties of fabrics-Part 3 Determination of tear force of trapezoid-shaped test specimens

GB/T3923.1 Textiles-Tensile properties of fabrics-Part 1 Determination of breaking force and elongation at breaking force- Strip method

Calibration

Being ready for four rank standard special gravity weight or 0.3 level standard dynamometer.

Adjusting into the test control process and result analysis interface, exert force to the sensor, observe the force value display on screen and readings from the dynamometer are the same or not, if the deviation is comparatively large, presskey, while the status display shows "standard", as shown on the right.

In the calibration state, you can use key to adjust the force value (coarse adjustment, the range of adjustment is comparatively larger), can also use key to adjust the force value (fine-tuning, the range of adjustment is comparatively smaller), to make force value and real force value (ie dynamometer) match, and finally press the "confirm" button .

Technical Parameters

Items Parameters

Maximum test force 3000N

The minimum resolution of the test force 0.1N

Test force indication error ± 1%

Maximum stroke 1000 mm

Displacement minimum resolution 0.01mm

Displacement accuracy ± 1%

Beam moving speed 1-500mm / min, continuously variable, using DC servo motor and control system

Liquid crystal display content test force, displacement, peak, running etc.

Host weight 200 kg

Testing machine size 600 × 400 × 1700 mm

Country:
Business Type:
Market:
Founded Year:
Address:
Contact:QIAN qian

building combustion performance tester

more images of Masks Universal Tensile Strength Tester

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Qinsun Instruments (Shanghai) Co., Ltd.
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters : 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

Synthetic Blood Penetration Tester for Medical Face Mask

AATCC 162 dry cleaning tester

SUGA MV3000-3kW metal vertical aging tester

Face Mask Tensile Testing Machine

Sunchex xenon lamp aging tester with adjustable temperature and humidity

Laboratory Universal Testing Machine 500N/1000N/5000N Fabric Yarn Textile Tensile Strength Tester

Single column digital display tensile machine 1.Introduction Tensile testing machine also known as materials testing machine , it is applicable to testing tensile stress, compression stress, shear force, peeling force and elongation of metal, plastic, rubber, textile, synthetic ...

Qinsuns Instruments Co., Ltd

Universal Tensile Strength Tester (Dual Column) QS-C01-1

Universal Tensile Strength Tester (Dual Column) QS-C01-1 This Universal Tensile Strength Tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, ...

Qinsuns Instruments Co., Ltd

5KN 100KN-1000KN Tensile Strength Tester PC Servo Universal Testing Machine

5KN 100KN-1000KNTensile Strength Tester US $500 coupons Warranty:1 year Load cell brand:500kg (5,10,50,100,200kg are optional) Certification:Ce,ISO Motor:high-precision mechanical ball screw rod Model Number:QS-B617-S source: https://www.testerinlab.com/ http://gellowen.co.uk/ ...

Qinsuns Instruments Co., Ltd

Universal Tensile Strength Tester - 5KN Servo Universal Tensile Testing Machine

Universal Tensile Strength Tester- 5KN Servo Universal Tensile Testing Machine $1,500.00 - $4,500.00/ set |1 set/sets(Min. order) Warranty:12 months, 12 Months Brand:QINSUN Model Number:QS-1065 Power:Electronic Keyword:Tensile Testing Machine Supply Ability :100 Set/Sets per ...

Qinsuns Instruments Co., Ltd

S70 Universal Tensile Strength Testing Machine Price

Introduction This tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and ...

Yuelian Ltd

YL-1152 Universal Tensile Strength Material Testing Machine

Feature YL-1152 Universal Tensile Strength Material Testing Machine apply to metal rod, concrete, fabric etc. Floor type, is more stable and convenient for operating. Strong structural and small volume, transmission efficiency more than 70%, less energy loss and high precision, ...

Yuelian Ltd