Aerial Self-supporting figure 8 fiber optic cable is a stranded multi loose tube fiber cable. The fiber core is up to 288cores. The center of the GYTC8S self-supporting figure-eight fiber optic cable core is a metal reinforcing core. The loose tube (and filling rope) is twisted ...
Outdoor cable applied to different environment condition, with the laying methods of dust, aerial, direct buried and underwater. Adopter to corn network, metropolitan area network, access network, ...
Fiber optic cable clamp is used to link a overhead fiber drop cable to a optical devices or a house suitable for both indoor and outdoor installation. Tuolima has many types of tension cable clamps made of stainless perforated shim materials, nylon or Aluminum, which increases ...
Outdoor fiber optical cable is a communication line applied in an outdoor environment. TUOLIMA can customize any model of outdoor fiber optic cable according to your requirements. If you need any technical support, we will also recommend the most suitable and cost-effective ...
Optic fiber mm 0.60±0.05 Spiral armored layer mm 2.50±0.10 Aramid yarn decitex 1100 Metal braiding mm Outer jacket mm 4.0±0.20 Applications lUsed in FTTX, from residence to data center and cabling level and vertical, also used in FTTH cable lUsed in communications in data ...
Item Unit Dimention thickness Optic fiber mm 0.60±0.05 Spiral armored layer mm 0.7±0.10 0.18 Aramid yarn decitex 1100 Outer jacket mm 2.0±0.10 0.4 Net-weight Kg/km 10 Cable Performance Item Unit G652D MM 50 MM 62.5 Attenuation dB/km 0.4dB/km@1310nm 0.3dB/km@1550nm ...
Specifications: Maximum diameter of cable core ø25mm Loose tube diameter/quantity ø1.5mm-7.0mm/6 ø1.5mm-ø3.0mm/6 Optical fiber pay-off reel specification PN630-PN800 PN800-PN1250 Take-up reel specification PN800-PN1800 (ø800*600*ø80-ø1800*1400*ø80) Yarn size ...
ftth fiber optic drop wire outdoor Cross-sectional drawing ftth fiber optic drop wire outdoor characteristics: - Special curved optical fiber, providing greater bandwidth and enhanced network transmission characteristics; - Two parallel fiber optic cable, FRP(or steel ) ...
Description In the GYTA cable, single-mode/multimode fibers are positioned in the loose tubes, the tubes are filled with water blocking filling compound.Tubes and fillers are stranded around the strength member into a circular cable core. An APL/PSP is applied around the core. ...
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic ...