BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance
with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set which use low pressure of start-up, provide smooth and reliable operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
Order Code:
Code | Remarks | |
BMS BMSS |
||
Displacement | ||
80 100 125 160 200 250 315 375 |
||
Flange | ||
E2 | 2-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 | BMS |
E4 | 4-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 | |
F6 | 6-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×2.6 | |
W | 4-Ø13.5 Wheel-flange Ø160,pilot Ø125×8 | |
E2B | 2-Ø14.3 Rhomb-flange Ø146.05,pilot Ø101.6×9.4 | |
SP | 4-Ø11.5 Square-flange Ø106.4,pilot Ø82.5×6.3 | |
D | 4-Ø11 Circle-flange Ø125,pilot Ø100×6 | BMSS |
E | 4-Ø13.5 Square-flange Ø127,pilot Ø101.6×6.3 | |
Output Shaft | ||
A | Shaft Ø25 , parallel key 8×7×32 | BMS |
B | Shaft Ø32 , parallel key 10×8×45 | |
D | Shaft Ø25.4 , parallel key6.35×6.35×25.4 | |
G | Shaft Ø31.75,parallel key 7.96×7.96×31.75 | |
F | Shaft Ø31.75,splined tooth 14-DP12/24 | |
FD | Long Shaft Ø31.75,splined tooth 14-DP12/24 | |
SL | shaft Ø34.85,Splined key 6-34.85×28.14×8.64 | |
T1 | Cone-shaft Ø35 ,parallel key B6×6×20 | |
T3 | Cone-shaftØ31.75,parallel key 7.96×7.96×31.75 | |
S1 | Shaft Ø25.4 ,splined tooth SAE 6B | |
I | Sub-shaft Ø22,splined tooth 13-DP16/32 | |
Omit | Short shaft 12-DP12/24 | BMSS |
Port and Drain Port | ||
D | G1/2 Manifold Mount 2-M10 , G1/4 | |
M | M22×1.5 Manifold Mount 2-M10, M14×1.5 | |
S | 7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF | |
P | 1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF | |
Rotation Direction | ||
Omit | Standard | |
R | Opposite | |
Paint | ||
00 | No paint |
Code | Remarks | |
BMS BMSS |
||
Displacement | ||
80 100 125 160 200 250 315 375 |
||
Flange | ||
E2 | 2-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 | BMS |
E4 | 4-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×6.3 | |
F6 | 6-Ø13.5 Rhomb-flange Ø106.4,pilot Ø82.5×2.6 | |
W | 4-Ø13.5 Wheel-flange Ø160,pilot Ø125×8 | |
E2B | 2-Ø14.3 Rhomb-flange Ø146.05,pilot Ø101.6×9.4 | |
SP | 4-Ø11.5 Square-flange Ø106.4,pilot Ø82.5×6.3 | |
D | 4-Ø11 Circle-flange Ø125,pilot Ø100×6 | BMSS |
E | 4-Ø13.5 Square-flange Ø127,pilot Ø101.6×6.3 | |
Output Shaft | ||
A | Shaft Ø25 , parallel key 8×7×32 | BMS |
B | Shaft Ø32 , parallel key 10×8×45 | |
D | Shaft Ø25.4 , parallel key6.35×6.35×25.4 | |
G | Shaft Ø31.75,parallel key 7.96×7.96×31.75 | |
F | Shaft Ø31.75,splined tooth 14-DP12/24 | |
FD | Long Shaft Ø31.75,splined tooth 14-DP12/24 | |
SL | shaft Ø34.85,Splined key 6-34.85×28.14×8.64 | |
T1 | Cone-shaft Ø35 ,parallel key B6×6×20 | |
T3 | Cone-shaftØ31.75,parallel key 7.96×7.96×31.75 | |
S1 | Shaft Ø25.4 ,splined tooth SAE 6B | |
I | Sub-shaft Ø22,splined tooth 13-DP16/32 | |
Omit | Short shaft 12-DP12/24 | BMSS |
Port and Drain Port | ||
D | G1/2 Manifold Mount 2-M10 , G1/4 | |
M | M22×1.5 Manifold Mount 2-M10, M14×1.5 | |
S | 7/8-14UNF O-ring manifold 2-3/8-16, 7/16-20UNF | |
P | 1/2-14NPTF manifold 2-3/8-16UNC, 7/16-20UNF | |
Rotation Direction | ||
Omit | Standard | |
R | Opposite | |
Paint | ||
00 | No paint | |
Omit | Blue | |
B | Black | |
S | Silver grey | |
Unusually Function | ||
Omit | Standard | |
LL | Low Leakage | |
F | Free Running | |
LS | Low Speed |
Yoyik supply HQ25.10Z hydraulic filter assy FILTER FOR CONTROL VALVE for India Thermal Power Selection of advanced technology, absolutely first-class service quality, YOYIK over the years to the same faith. The main technical backbone are retired senior engineer, senior ...
\"India Thermal Power Hydraulic oil filter TL147 is a specific product for power plants from Dongfang Yoyik. The company is located in the industry city of southwest China, Deyang. We provide spare parts of DC power units, including valves, bearings, servo valves, filters, EH ...
Supply ! High precision surface Grinder machines for hydraulic parts ...
Our medium pressure hydraulic hoses have two types including medium pressure hydraulic hose 1SN and 2SN. They have the same cover and core. The core is oil and water resistant synthetic rubber, and the cover is black color synthetic rubber resistant to oil, water and ozone. The ...
Place of Origin:Jiangsu China (Mainland) Cold Drawing Machine is the special equipment for drawing the ferrous metal tubes, and it can draw many tubes at the same time ...
Model Number:M7136 Brand Name:XRL High quality design team,First-class post-sale service grinding machine ...
Model Number:M7136 Brand Name:XRL High quality design team,First-class post-sale service ...
color:yellow Feature:Truck Crane Application:most sites Max. Lifting Height:56M Max. Lifting Load:50T Rated Loading Capacity:50T Model Number:TG-500E Brand Name:TADANO Place of Origin:Japan tadano Mobile crane, 50t used hydraulic crane Model:TG-500E ,year:2005 location: ...
Specification:SAE Type:Frozen oil Application:Industrial Lubricant Brand Name:kunlun Place of Origin:Shandong China (Mainland) Kunlun Tiange Hydraulic Oil L-HM68 ...