Thickness: 1-100 mm.
Material Specification of Conductive PE Foam
The said product is a close-cell, conductive foam. It is produced by compounding the PE resin with conductive fillers &
blowing agents to extrude certain sheets,then cross-linking and foaming. The basic process can be summarized to the following:
1.1 Pellitizing master batch by compounding PE resin with carbon black and AC foaming agents;
1.2 Extrude the said batch to make certain sheets with different thickness & width;
1.3 Crosslink the said sheets under electric beam;
1.4 Make the crosslinked sheets foam in foaming furnac
2.1 Normal size:
2.2 Special size:
2.2.1 Special thickness such as 25mm, 20mm,15mm and 10mm should be ordered
2.2.2 Small length, width and profile product are to be ordered.
3.1 Excellent ESD effect because its interior conductive lattice
3.2 Able to leaking static electricity rapidly and free of environmental humidity
3.3 Long time and even Permanent ESD duration(at least 3 years).