1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH2/AH22 Withdrawal Sleeve

Minimum Order
1
Place Of Origin
china
Packaging
N/A
Delivery
15 Days
Withdrawal(Extraction) sleeves can be used to mount bearings with a tapered bore on cylindrical seats of stepped shafts. The sleeve is pressed into the bore of the bearing that abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. Lock nuts or endplates are not supplied with the withdrawal sleeves.
To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. To do this, particularly where larger bearings are concerned, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft. Mounting and dismounting of bearings on withdrawal sleeves can be facilitated considerably by using a hydraulic nut .Basic design
Withdrawal sleeves are slotted and have an external taper of 1:12 except for those in the AH 240 and AH 241 series which have an external taper of 1:30 and are intended for use with wide bearings in the 40 and 41 Dimension Series.
The nuts required for dismounting the withdrawal sleeve are not supplied with the sleeve and must be ordered separately.
Materials
The materials using in withdrawal sleeves are carbon steel with a tensile strength at least 430N /mm2.
Dimensions
The dimensions of withdrawal sleeves are in accordance with ISO 2982-1:1995.
Tolerances
The bore diameter of withdrawal sleeves is to tolerance JS9, the width to h13.
Thread
Withdrawal sleeves up to size 38 have metric threads with 6g tolerances according to ISO 965-3:1998. Larger withdrawal sleeves have metric trapezoidal threads with 7e tolerance according to ISO 2903:1993.
If standard nuts are not used, the threads of nuts for withdrawal sleeves up to size 38 should correspond to tolerance 5H according to ISO 965-3:1998. The threads of nuts for larger withdrawal sleeves should correspond to tolerance 7H according to ISO 2903:1993.

  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Africa,Americas,Asia,Emerging Markets,Europe,European Union,G20
  • Founded Year:1965
  • Address:
  • Contact:Yang Qiaoli
more images of 1045/1020 steel Rolling bearings withdrawal sleeve,inch/metric Withdrawal Sleeve,Conical withdrawal sleeve AH2/AH22 Withdrawal Sleeve
*Your name:
*Your Email:
*To:Henan Province Yuxi Bearing Co.,Ltd. Adapter Sleeve Branch
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...