Carbon Fiber Composite Tube

Minimum Order
10
Place Of Origin
China
Packaging
N/A
Delivery
35 Days
Carbon fiber (abbr. CF) tube/pipe,also called as carbon tube, is made from CF composite material after presoaked into styryl polyester resin, heated, solidified, pulled, extruded and rolled. The CF composite could be made to various kinds of products based on different dies. For instance, CF round tubes of different specifications, CF square tubes of different specifications CF sheet of different specifications and other profiles. The appearance could be beautified by covering with 3K wave or others in production process.

Features of CF tube

1.High tensile strength

The tensile strength of CF could reach over 3000mpa, 6-12 times that of steel

2. Low density & light weight. The density of CF is less than that of 1/4 of steel.

Application: the CF tube is widely applied in mechanical equipment, such as kite, model plane, lamp holder, PC equipment rotating shaft, etching machine, medical device, sports equipment and so on.

Performances of CF products: dimensional stability, conductivity, thermal conductivity, small thermal expansion coefficient, self-lubricating, energy absorption, shock resistance, high specific modulus, fatigue resistance, creep resistance, heat resistance, corrosion resistance, wear resistance and so on.

We mainly produce large-size CF tubes, which is applied to exhaust pipe, telescope pipe, marine test pipe and so on. The pipes are of high dimensional precision, good appearance, etc.

Appearance of the tubes: 3K plain wave/cross wave, light paint

Remark: pleasemake a description of the inside dimension, outer diameter, length, appearance wave line, special requirements like the pressure that the product need to bear, heat resistant temperature, the X-Ray transmittance of the medical device, etc.

CF products are widely applied in fields of aerospace, defense industry, medical treatment, electron industry, sports industry, building industry and others. Compared with steel, CF owns higher tensile strength, lighter weight, better corrosion resistance, low aluminum wastage, could be used for long time with no deformation and is called as green environmental material.

Welcome to inquire.

  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Americas,Europe,Asia,G20,Oceania,Emerging Markets,European Union,Middle East
  • Founded Year:2017
  • Address:Daliang, Shunde District
  • Contact:Jane Li
more images of Carbon Fiber Composite Tube
more images of Carbon Fiber Composite Tube
*Your name:
*Your Email:
*To:Foshan Zhihui Junzhang Advanced Composite Technology Co., Ltd
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Optical PLC Splitter Mini Tube Steel Tube Bare Ribbon Fiber
Optical PLC Splitter Mini Tube Steel Tube Bare Ribbon Fiber

The bare fiber type PLC optical ribbon fiber splitter is directly used by the optical fiber (usually using a ribbon fiber), and the two ends are not terminated. It is mainly suitable for occasions that are not frequently disassembled, such as cable connector boxes and fiber ...

ShenZhen UnitekFiber Solution Limited

Grade CA Carbon Fiber Reinforcement PEEK
Grade CA Carbon Fiber Reinforcement PEEK

PEEK-CA series reinforced plastics filled with carbon fiber, high elastic modulus, mechanical strength, creep resistance, wear resistance and dynamic fatigue resistance. Types of Grade CA Carbon Fibre PEEK ZYPEEK Supplier CA Series-770CA30 PEEK Carbon Fiber Reinforcement CA ...

Jilin Joinature Polymer Co.,Ltd.

CA Series-770CA30 PEEK Carbon Fiber Reinforcement
CA Series-770CA30 PEEK Carbon Fiber Reinforcement

CA Series-770CA30 carbon fiber filled PEEK reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or ...

Jilin Joinature Polymer Co.,Ltd.

CA Series-550CA30 PEEK Carbon Fiber Reinforcement
CA Series-550CA30 PEEK Carbon Fiber Reinforcement

CA Series-550CA30 PEEK carbon fiber reinforcement is a 30% carbon fiber reinforced PEEK plastic material, the addition of carbon fiber significantly increased the material\'s wear resistance and high temperature mechanical strength, thermal conductivity is pure resin G series 3 ...

Jilin Joinature Polymer Co.,Ltd.

CA Series-330CA30 PEEK Carbon Fiber Reinforcement
CA Series-330CA30 PEEK Carbon Fiber Reinforcement

CA Series-330CA30 PEEK FC, CF PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336 ° C) , also can maintain ...

Jilin Joinature Polymer Co.,Ltd.

Carbon Steel Tube - Laser Cutting Machine Be Applied
Carbon Steel Tube - Laser Cutting Machine Be Applied

Laser Tube Cutting Machine For Carbon Steel The carbon steel also called mild steel is a steel with carbon content from about 0.05% up to 2.1% by weight. Carbon steel is commonly used structurally in buildings and bridges, axles, gears, shafts, rails, pipelines and metal ...

Wuhan Golden Laser Co., Ltd

CARBON FIBER WARP KNITTING MACHINE
CARBON FIBER WARP KNITTING MACHINE

Multiaxial fabrics processed by carbon fibre are widely used in carbon fibre reinforced composites, such as wind power generation, aerospace and so on. Because carbon fibre is easy to produce conductive carbon powder in the manufacturing process, which will lead to dangerous ...

CHANGZHOU RUNFENGYUAN TEXTILE MACHINERY MANUFACTURING CO.,LTD

Fiber Laser Tube Cutting Machine for Flexible Manufacturing System Manufacturer
Fiber Laser Tube Cutting Machine for Flexible Manufacturing System Manufacturer

Industry 4.0 time, with advanced CNC controller to realize production line ERP management. Realize a completely automatic production model. Overview of Fiber Laser Tube Cutting Machine Flexible Manufacturing System The integration of laser cutting and sorting will help ...

Wuhan Golden Laser Co., Ltd