The feeding unit is a roller feed type conveyor, allowing further automation of textile and foil laser processing. The material is forwarded from the roller to the laser system where it is
cut or engraved. The automatic edge control of the feeding unit ensures a constant material alignment and thus continuously precise high quality cuts – meter by meter. The material feed is
stretching-free, and the contactless laser processing leads to excellent results.
1. Mono or Double feeder vary with laser cutting application.
2. An increase in productivity for loading and unloading during the cutting process.
3. Workpiece removal during the cutting process at the collecting table possible.
4. The material feed is stretching-free.
5. Accurate placement of the workpiece through automatic edge control with the Feeding Unit.
6. Processing of very large formats by edgeless continuation of cuts possible.
Technical Data of the uv led curing head Wavelength(±5nm) 365nm / 385nm/395nm/405nm Curing area 300x400mm / custom sizes available Input voltage 220VAC 50Hz / 60HZ Cooling method fan cooling Life >20000 H Conveyor speed 1-10m/min adjustable Belt material Teflon Optic power ...
Technical Data Wavelength(±5nm) 365nm / 385nm/395nm/405nm Curing area 300x400mm / custom sizes available Input voltage 220VAC 50Hz / 60HZ Cooling method fan cooling Life >20000 H Conveyor speed 1-10m/min adjustable Belt material Teflon Optic power 1200mw/cm2 (10mm irradiation ...
Technical Data Wavelength(±5nm) 365nm / 385nm/395nm/405nm Curing area 300x400mm / custom sizes available Input voltage 220VAC 50Hz / 60HZ Cooling method fan cooling Life >20000 H Conveyor speed 1-10m/min adjustable Belt material Teflon Optic power 1200mw/cm2 (10mm irradiation ...
Technical Data Wavelength(±5nm) 365nm / 385nm/395nm/405nm Curing area 300x400mm / custom sizes available Input voltage 220VAC 50Hz / 60HZ Cooling method fan cooling Life >20000 H Conveyor speed 1-10m/min adjustable Belt material Teflon Optic power 1200mw/cm2 (10mm irradiation ...
The key parts of Bottom Feeding Automatic Die Cutting and Creasing Machine, such as the bottom platform, moving platform, upper platform and wall panel are made of high-strength nodular cast iron, which are not easy to deform when working under high pressure. Specification of ...
Guangzhou Growing Mechanical Information Technology Co., Ltd
Suitable to feed large quantities of fruits and vegetables in an efficient, hygienic and controlled manner for feeding, inspection, transportation for preparation of fresh fruits and vegetables. Can be designed in different belt sizes of food gradeconveyor ...
Hopper dryer is the replacement product of standard hot air dryer, which is improved on the basis of the original function to fully consider the environmental factors. It can dry raw materials that are moist from packaging, transportation or recycling. In the processing of raw ...
https://www.ubwoodoptimizing.com/AUTOMATIC-FEEDING-SYSTEM-FOR-Multi-RIP-SAW.html AUTOMATIC FEEDING SYSTEM FOR Multi-RIP SAW Automatic feeding system, automatically feeding and locating the board, and human intervention is available to adjust the position of the board. Before the ...
Parameter 一、MT full-drive digital puller 1.Model:MTW/MTT/MTP/MTS/MTI/MTM/MTH 2.Drive method:independent stepper motor 3.Lifting method:electromagnetic lifting method 4.Pressure adjustment:spring adjustment 5.Lifting height:small and equal 30mm non-working state(small and ...
We have strong capability on research and development. We can design specific automatic feeding device according to client’s requests. We have various automatic feeding methods, such as disk sorting, swing sorting, robot sorting, multisection conveying belt feeding (straight ...