Features
1. Can achieve single or multi-layer high-yield screening
Can be sieved up to 6 particle size. The sieve diameter is from 600mm (24 inches) to 2.6mm (104 inches); small shaking sie can be equipped with 4 layers of sieve, large can reach 5 layers, while providing 5 to 6 groups of grading.
For a single graded product, our technology can help you get double or even higher capacity on the same sieve.
2. Maximize screening efficiency and product efficiency
The principle of the shaking screen is actually a mechanical simulation of human sieves. Smooth acceleration with low speed operation to ensure that the material always rolls on the surface of the screen. Especially for dry, low-density particles; but also effectively reduce the high abrasive products on the screen itself (especially the screen) wear.
3. Each layer of the screen to achieve accurate particle size grading
The material is fed from an almost horizontal sieve center and diverges to the periphery along the spiral curve. At the same time, as the vertical acceleration increases, the fine particle product is forced to pass through the screen surface.
4. Easy and convenient operation
When the product size close to 30 microns, the mesh size of the plug to become an urgent problem to be solved. With our multi-cleaning system will be solved; clean ball, independent gear-driven brush cleaning, jet cleaning and jet / brush combination cleaning system. Partially used or all of the jet cleaning system, usually used for viscous or static products.
5 .effectively reduce the breakage of fragile materials
The hand sieve can give the material a mild treatment. The shaker perfectly reproduces the same movement, which is used in a variety of occasions where particle breakage is prohibited, such as particle spray drying of coffee, bio pharmaceutical powder products, and powdered milk and metal powders
6 .effectively reduce maintenance time
Quick and easy to split and install as fast as 15 minutes. Only the timing lubrication of the bearing, to ensure the continuous operation of the equipment full load.
7. less maintenance costs
The main parts include: screen, seals, rubber ball or brush.
8. dynamic base load can be ignored
Each shaker will be adjusted to the full balance before it is shipped. So on the user's site, it can be placed on a very high steel structure, taking into account the complexity of the dynamic load need to start again before the balance test;
9. low noise, low energy consumption
Due to the modular design is simple and low running noise characteristics, shaking is always maintained at 60 to 70 dB, to ensure the smooth operation of the quiet; ordinary Y series motor, minimum mechanical power driven 0.25 KW, weighing 2 tons of the largest aircraft needs only 5.5 KW;
10 .absolute dust control
In addition to the existing ventilation system, the shaker does not require any air purification or dust collection auxiliary device. The system can be equipped with air tightness and vacuum design, as well as nitrogen purification.
Guangzhou Meton: King of Screen Mesh. No.1 market share in South China. Expert of conveyor roller. Make every conveyor roller with full heart. Unanimous praise from customers in Pearl River Delta area. Appointed supplier of vibrating screen mesh for 1.5 million cbm/month stone ...