Plastic Intalox Saddle with High Void Volume

Plastic Intalox Saddle - an Economical Random Packing

Plastic intalox saddle, composed by annulus and saddle, is made of heat-resistant and anti-corrosion plastic, mainly including PE, PP, RPP, PVC, CPVC and PVDF. It has characteristics such as low pressure drop, small specific gravity, high mass transfer efficiency, high void volume, high stability and so on. Compared with metal intalox saddle

PIS-01: Plastic intalox saddle, composed by annulus and saddle.

PIS-02: Plastic intalox saddle has high void volume and high stability.

Specification - plastic intalox saddle
Model	Type	Diameter × Height × Thickness D × H × δ (mm)	Bulk number (m^-3)	Bulk density (kg/m³)	Specific surface area (m²/m³)	Void volume (m³/m³)	Dry packing factor (m^-1)
PISS-01	DN 25	25 × 12.5 × 1.2	97680	102	288	0. 85	467
PISS-02	DN 38	38 × 19 × 1.2	25200	91	265	0.95	309
PISS-03	DN 50	50 × 25 × 1.5	9400	75	250	0. 96	282
PISS-04	DN 76	76 × 38 × 3.0	3700	59	200	0. 97	220
Materials: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). Suitable temperature range: less than or equal to 100°C.

Feature

High mass transfer efficiency.
High void volume.
High stability.
Low pressure drop.
Small specific gravity.
Wide application scope.
Economical.

Application

Due to all of these advantages, plastic intalox saddle is widely used in the packing towers in petroleum, chemical, coal gas and environmental protection industries, etc.

Package

Packaged in dry boxes and cases.