Carbon Steel Perforated Metal

Packaging
N/A
Delivery
15 Days

Carbon Steel Perforated Metal

Perforated carbon steel has no specified minimum quantity of any alloying element and contains only an incidental amount of any element other than carbon, silicon, manganese, copper, sulphur and phosphorus.

It is the most corrosive and least expensive of the commonly perforated metals.

Carbon steel is either referred to as Hot Rolled, steel that underwent a rolling thickness reduction step while hot, or Cold Rolled, where the steel is cold reduced to the specified thickness. Cold rolling elongates the grains of the steel in the direction of rolling, making the steel hard and brittle. Annealing in a reducing atmosphere recrystallizes the grains, giving the perforated sheet steel the ductility needed for its intended use.

Hot Rolled Pickled and Oiled Hot rolled coil or sheet steel that has been descaled of oxide film by either a chemical method, mechanical method, or a combination of both and oiled for corrosion protection.

Hot Rolled

Commercial Quality A low cost steel with moderate forming and drawing qualities, for use where finish is unimportant
Drawing Quality This quality is intended for uses where forming requirements are too severe for Commercial Quality.
High Strength, Low Alloy Good formability because of low carbon content in combination with relatively high yield and tensile properties permit these steels to be used in lighter gauges to reduce weight in applications where strength is important. Readily weldable.
Abrasion Resisting High manganese content in combination with intermediate carbon greatly enhances resistance to abrasion. Can improve part life 2 to 10 times. Moderate formability.

Cold Rolled

Commercial Quality Cold Rolled steels have improved surface finishes and tighter size tolerances than Hot Rolled steels. They are available in two classes: Class 1 is intended for exposed applications, Class 2 is for unexposed use.
Drawing Quality Intended for uses where forming requirements are too severe for Commercial Quality.
Drawing Quality Special Killed This steel has special retarded aging characteristics and is recommended for use when the material must be free of surface disturbances without roller leveling immediately before using and must be essentially free from significan

you can try perforated metal    to get through more products

  • Country: Afghanistan
  • Business Type:
  • Market:Africa,Americas,Asia,Emerging Markets,European Union,G20
  • Founded Year:
  • Address:22 Mingqin street, Anping, Hebei, China.
  • Contact:hui zhang
more images of Carbon Steel Perforated Metal
*Your name:
*Your Email:
*To:Winner Perforated Metal Company
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

CV Joint Bearing For Steel and Non-ferrous Metal Industries
CV Joint Bearing For Steel and Non-ferrous Metal Industries

The main CV joint bearing is ball cage type, designed and developed BJ, BHJ, BJS, BC, DOJ five categories, compared to NTN, the model specification is more complete, for different fields, use conditions, almost all can choose the appropriate coupling. In the field of vehicles, ...

BOYA Precision Industrial Equipments Co.,Ltd

Carbon Steel Shock Spring
Carbon Steel Shock Spring

The advantages ofshock absorber carbon steel spring Carbon steel is a steel with a high carbon content and its advantages are mainly the following: 1. high strength: carbon steel has a high strength and can withstand large loads and impacts. 2. good plasticity: carbon steel has ...

Zhejiang Shenglong Spring Co., Ltd.

Carbon Steel Shock Spring
Carbon Steel Shock Spring

1. high strength: carbon steel has a high strength and can withstand large loads and impacts. 2. good plasticity:carbon steel 3. good wear resistance: carbon steel has good wear resistance, can be used to manufacture wear-resistant parts, such as mechanical parts, tools, etc. ...

Zhejiang Shenglong Spring Co., Ltd.

Carbon Steel Shock Spring
Carbon Steel Shock Spring

The advantages ofshock springs for motorbikes 1. Reduced vibration: Motorcycle shock springs can effectively reduce the vibration generated during driving, resulting in a smoother and more comfortable ride. 2. Increased stability: Shock springs prevent the motorbike from ...

Zhejiang Shenglong Spring Co., Ltd.

Carbon Steel Shock Spring
Carbon Steel Shock Spring

通常,摩托车减震弹簧由以下类型的弹性材料制成: 1、优质弹簧钢:弹簧钢含碳量高,硬度、韧性和抗疲劳性能良好,适合制作减震弹簧,是比较常用的材料。 ...

Zhejiang Shenglong Spring Co., Ltd.

Carbon Steel Shock Spring
Carbon Steel Shock Spring

1、减少振动:摩托车减震弹簧可以有效减少行驶过程中产生的振动,从而使乘坐更加平稳、舒适。 2、增加稳定性:减震弹簧可以防止摩托车在颠簸路面或不规则路面行驶时晃动,提高行驶稳定性和可控性。 ...

Zhejiang Shenglong Spring Co., Ltd.

Carbon Steel Shock Spring
Carbon Steel Shock Spring

1、优质弹簧钢:弹簧钢含碳量高,硬度、韧性和抗疲劳性能良好,适合制作减震弹簧,是比较常用的材料。 ...

Zhejiang Shenglong Spring Co., Ltd.

Metal nameplate stainless steel business card etching
Metal nameplate stainless steel business card etching

Customized Stainless Steel Metal Business Cards, Precision etching of metal nameplates, combining durability with distinctive visual appeal. View our etching production facility WET – Precision Etching Specialist Category: Uncategorized Description Metal nameplate stainless ...

Shenzhen Xinxin Precision Equipment Co., Ltd.

rustproof surface U Channel Shaped steel metal post perforated tube
rustproof surface U Channel Shaped steel metal post perforated tube

Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...

Better Products Co.,

U Shaped perforated tubing Hot dip galvanized steel
U Shaped perforated tubing Hot dip galvanized steel

Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...

Better Products Co.,