UNIVERSAL LCD LED TV REPAIR PARTS VGA/HDMI/AV/TV/USB HDMI TV MOTHERBOARD

UNIVERSAL LCD LED TV REPAIR PARTS TV TUNER CARD TV MOTHERBOARD

	Backlight Type:	LED	Screen Size:	14" - 32"	Wide Screen Support:	Yes
	Operating Voltage:	3.3V 5V 12V	Use:	LED LCD TV	Cabinet Color:	Blue / Green
	Resolution:	1920*1080(Full HD)	Certificate:	UL, Rosh, ISO9001	Language:	Multi-language OSD
T.V56.03 (V56)
IC	TSUMV56RUU-Z1
OSD	22 Languages
Interface	Interface	LVDS 30PIN
Resolution	Max 1920*1080 1920*1200@60Hz
Video Input	TV	Received frequency range	49MHz-863MHz
Input impedance	75Ω
Color System	PAL/SECAM, NTSC
Sound System	BG, DK, I, L/M, N
PC Input	R, G, B+H/V	Max 1920*1200@60Hz
HDMI	1080P
Component	YDB/PR
USB	2
Video	Color System	PAL/SECAM, NTSC
Video Range	1.0 Vp-p±5%
Audio Input	PC	Earphone Input	0.2-1.5Vrms
Audio	L/R RCA Input	0.2-1.5Vrms
Component	L/R RCA Input
Audio Output	Frequency Range	100Hz-15000Hz @±3dB (1KHz 0dB Benchmark Signal)
Loudspeaker Output	2*10W
Power	Input	Single +12V
Screen Power Supply	3.3V, 5V, 12V
Power Management	<1W
Keyboard	Standby, Source, Menu, CH+, CH-, VOL+, VOL-
		USB	2PIN Rice yellow Color
		HDMI	1 HDMI Port
		PC	1D-SUB 15PIN Terminal
		PC-RGB Audio	1 Earphone Socket(black)
		Video	2RCA Terminal (Yellow)
		Audio	2RCA Terminal (White, Red)
		TV	1IEC Connector 75Ω

1. Suitable for worldwide analog TV system PAL/NTSC/SECAM

2. LCD control board Support 3D board
3. Expanded port board can support1~2 AV input,1AV output,1YPBPR input
4. Reliable EMC and antistatic treatment measures
5. Automatically detect input video format
6. VGA +DVI +HDMI+USB inputs.
7. Built-in superior quality stereo speakers.
8. Support multi OSD languages.
9. Max supports Full HD lcd tv main board 1920X1080 resolution TFT-LCD screen
10. Dynamically adjust picture's color, contrast ratio, definition and so on
11. Rating of Audio loudspeaker output is 2W*2(8ohm)
12. Universal TV Tuner Card support lot of panel
1.Firmware Writing
Step 1: Empty the U disk
Step 2: Copy the corresponding resolution program (*. Bin file) with the TXT file to the
U disk base on your screen size (If you have special screen requirement, please
contact with Cindy, she will give you another program, but normally the general
program is enough)
Step 3: Connect the U dish and TV Mainboard Via USB Interface
Step 4: Connect the Keyboard and TV Mainboard
Step 5: Connect the power supply, check the keyboard light. If there is a flashing light,
that is in the written program, waiting for the light turn to Green, work is done.
If there is no flashing light, please cut off the power supply, then connect the USB once
again, then connect the power supply again,
(Note: *During Step 5,the power supply can't be cut off *The same firmware can only
be burned once time)
Please check the Video for more instruction
After all done, use the remote control to turn on the tv (after burning the firmware, the
mainbaord is on standby, need the remote control to turn on the tv)
2. Factory Settings
Menu--remote control press 1147--factory setting
Screen Specification Adjustment: Factory setting--Use the right key to choose--MAP
data (LVDS MAP DATA has 16 items totally, it is enough for most of the screen)
3. BOOT LOGO SETTING
Step 1: Put your logo into the U disk
Step 2: connect your U disk with mainboard
Step 3: Find your logo in Multi-media File
Step 4: Select your logo
Step 5: Press No."6 " on remote control to change to full screen play, then press "ok" on
the remote control, on the bottom of the option items, there is a " catch", choose it.
Done

Welcome To Contact With Acelin For Getting Free Firmwares