SMU MA SML DIN EN877 CAST IRON PIPES AND FITTINGS AND COUIPLINGS

Cast Iron Pipe confirming to DIN/EN877/ISO6594

Material:Cast Iron with flake graphite

Qualilty:GJL-150 according to EN1561

Coating: SML,KML,BML,TML

Size:DN40-DN300

The gray cast iron soil pipes produced by centrifugal technology which are used

in drainage sewer system and ventilation ducts system through a flexible linkage.

which have following advantages :flat straight,even pipe wall.

high strength and density,high smoothness internal and external surface,

no casting defect, easy installation, easy maintain, long using life,

environmental protecting,fireproofing and no noise.

SML DIN/EN877 Cast Iron Socketless Pipes

SML Above ground soil, vent and rainwater pipework

Internal painting : two-part epoxy resin painting, ochre colour,

with an average dry thickness of 120 microns.

External painting: anti-corrosive primer painting, red-brown colour,

with average dry thickness 60 microns.

KML Below ground drain pipework1=2 part epoxy

Externally – initial flame applied anti-corrosive zinc coating at 130g/m2, then

painted using a grey acrylic primer with an average dry thickness of 40 microns.

Internally – two-part epoxy coating, ochre colour, with an average thickness of

250 microns.

TML DIN/EN877 Cast Iron Socketless Pipes

Externally – anti-corrosive zinc-spray coating at 130g/m2, then

painted using a Reddish/brown epoxy coating with an average dry thickness of 60 microns.

Internally –Yellow epoxy coating, with an average thickness of 150-200 microns.