Oil Immersed Transformer

Minimum Order
1
Packaging
N/A
Delivery
5 Days
Oil Immersed Transformer - Oil Cooling System


Oil immersed transformer


Matters need to attention:
Due to the oil immersed transformer is immersed in the oil tank, if the oil spray or leakage, there may result in fire. Thus, oil immersed transformer is generally used in separate room or exterior places. If the climate of the installation region is relatively heat and humidity, the oil immersed transformer is also a good choice.


Fire precaution:
We should pay specially attention to the fire precaution of the oil filled transformer.


The fireproof distance between oil filled transformer with oil over than 2500 kg and oil-filled electric equipment with 600-2500 kg oil should not less than 5 m.
When fireproof distance of two adjacent oil filled transformers does not meet requirements, the fireproof wall or fireproof water curtain on top of the fireproof wall should be set. When it comes to single-phase oil filled transformer, it only needs to set fireproof wall or fireproof water curtain.
When the distance between outside building wall and oil filled transformer in outside is less than the standard regulations, the outside building wall should adopts the fireproof wall and the distance between wall and voltage transformer should not less than 0.8 m.
When the oil filled transformer or other oil-filled electric equipment with oil over than 1000 kg, oil storage pit and oil collection basin should be set, at the same time, the transformer cobblestone should be stored for fireproof or oil offloading.
According to the relevant present provisions, oil filled transformer should be equipped with fire extinguishing system. Oil filled transformer used for factory should be set in a separate room. The room door should be the class B fire door and open to the outside or corridor and it should not open to other rooms.Oil Immersed Transformer - Oil Cooling System


Oil immersed transformer, also called oil filled transformer, is a kind of voltage transformation device utilizing oil cooling method to reduce the transformer temperature. Different from the dry type transformer, the body of oil immersed transformer is installed in the welded steel oil tank filled with insulation oil. When oil immersed transformer in operation, the heat of coil and iron core firstly is transformed to the insulation oil and then to the cooling medium. And according to the capacity sizes, it can be divided into immersed natural cooling transformer and immersed forced air cooling transformer.




Matters need to attention:
Due to the oil immersed transformer is immersed in the oil tank, if the oil spray or leakage, there may result in fire. Thus, oil immersed transformer is generally used in separate room or exterior places. If the climate of the installation region is relatively heat and humidity, the oil immersed transformer is also a good choice.


Fire precaution:
We should pay specially attention to the fire precaution of the oil filled transformer.


The fireproof distance between oil filled transformer with oil over than 2500 kg and oil-filled electric equipment with 600-2500 kg oil should not less than 5 m.
When fireproof distance of two adjacent oil filled transformers does not meet requirements, the fireproof wall or fireproof water curtain on top of the fireproof wall should be set. When it comes to single-phase oil filled transformer, it only needs to set fireproof wall or fireproof water curtain.
When the distance between outside building wall and oil filled transformer in outside is less than the standard regulations, the outside building wall should adopts the fireproof wall and the distance between wall and voltage transformer should not less than 0.8 m.
When the oil filled transformer or other oil-filled electric equipment with oil over than 1000 kg, oil storage pit and oil collection basin should be set, at the same time, the transformer cobblestone should be stored for fireproof or oil offloading.
According to the relevant present provisions, oil filled transformer should be equipped with fire extinguishing system. Oil filled transformer used for factory should be set in a separate room. The room door should be the class B fire door and open to the outside or corridor and it should not open to other rooms.
You can contact us via sales@electricpowerdistribution.com, if you have any questions about our products.

  • Country: China (Mainland)
  • Business Type:
  • Market:
  • Founded Year:2000
  • Address:West Industry Park, Hengshui, Hebei, China.
  • Contact:Anna Gao
more images of Oil Immersed Transformer
*Your name:
*Your Email:
*To:Hebei Keneng Electric Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Oil Immersed Transformer
Oil Immersed Transformer

As one of the professional oil filled transformer manufacturers, our oil immersed power transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil ...

Shaanxi Hanzhong Transformer Co., ltd

Oil Immersed Transformer
Oil Immersed Transformer

As one of the professional oil filled transformer manufacturers, our oil immersed type transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil ...

Shaanxi Hanzhong Transformer Co., ltd

Three Phase OLTC Oil-Immersed Transformer
Three Phase OLTC Oil-Immersed Transformer

OLTC distribution transformer (on load tap changer transformer), HV level is 35kV and below, LV is 400V, the capacity is 2500kVA and below. The voltage can be regulated without turning off power supply. As one of the leading oil immersed distribution transformer suppliers, the ...

Shaanxi Hanzhong Transformer Co., ltd

Three Phase Oil-Immersed Distribution Transformer
Three Phase Oil-Immersed Distribution Transformer

Shanxi Hanzhong provides high quality 3 phase distribution transformer at a good price as a professional distribution transformer china manufacturer. Three phase oil immersed transformer, HV level is 35kV and below, LV is 400V, the capacity is 2500kVA and below. The tank of the ...

Shaanxi Hanzhong Transformer Co., ltd

20kv Series Oil-immersed Distribution Transformer
20kv Series Oil-immersed Distribution Transformer

Description of 20kv Series Oil-immersed Distribution Transformer Oil immersed power transformer, based on know-how accumulated over decade years in oil immersed distribution transformer field, YUEBIAN’s oil-immersed transformers have been supplied to various industries ...

Yuebian Electric Co.,Ltd.

S15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer
S15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer

General introduction ofS15-M Type Oil-Immersed Amorphous Alloy Distribution Transformer S15 transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance. It applies new type ...

Yuebian Electric Co.,Ltd.

11kv Series Oil-immersed Distribution Transformer
11kv Series Oil-immersed Distribution Transformer

General introduction ofS11-M Type 10kv Series Sealed Tank Distribution Transformer S11-M transformer is in development at S9 series transformer. It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance. It applies new type ...

Yuebian Electric Co.,Ltd.

3 Phase 33kv/11kv Power Distribution Transformer, 50~2500kVA Oil Type Transformer Factory Price
3 Phase 33kv/11kv Power Distribution Transformer, 50~2500kVA Oil Type Transformer Factory Price

Product introduction The three-phase oil-immersed transformer applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality ...

Qingdao Hengfengyou Electric Engineering Co., LTD.

Low Loss 11kv Oil Type Distribution Transformer, 33kv Electric Transformer Capacity 30kVA to 50mva
Low Loss 11kv Oil Type Distribution Transformer, 33kv Electric Transformer Capacity 30kVA to 50mva

Product introduction The three-phase oil-immersed transformer applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality ...

Qingdao Hengfengyou Electric Engineering Co., LTD.

Power Supply 3 Phase 33kv/11kv Power Distribution Transformer, 50~2500kVA Oil Type Transformer Factory Price
Power Supply 3 Phase 33kv/11kv Power Distribution Transformer, 50~2500kVA Oil Type Transformer Factory Price

Product introduction The three-phase oil-immersed transformer applies new type insulation structure and improves the ability of short-circuit resistance.The iron core is made of high-quality cold-rolled silicon-steel plate.High-voltage winding group is made of high quality ...

Qingdao Hengfengyou Electric Engineering Co., LTD.