AF-01 Low Temperature Defoamer
Product sourcing details
- Place of Origin
- China (Mainland)
- Packaging
- Plastic drum
Supplier: Shijiazhuang Huancheng Biochemical Factory
Purchasing information
- Minimum order
- 500
- Lead time
- 10 Days
Please confirm with the supplier: Model / reference, Key specifications / compatibility, Samples, Export markets, Supply capacity.
Specifications
AF-01 low temperature defoamer
General Description
Suitable for water-based system defoaming, low dosage, rapid defoaming, good effect in foam inhibition. It can be applied in the 100℃water-based system, such as sizing, preparation of pretreatment solution, dyeing bath, printing paste, water-proof coating paste, pigment manufacturing, paper making and effluent treatment.
Technique Data
1. Composition: Silicon emulsion, nonionic surfactant
2. Properties
Appearance: milk white liquid
Solid content:4%
Ion: anionic/nonionic
Solubility: soluble in water
Application methods
Diluted with 20-30 times of water, adding to the defoamed system, dosage depends on the usage, normal dosage for textile printing and dyeing is 200-1000ppm, for paper coating is 500-1500ppp, practical dosage depends on trials.
Safety Notes 125kg plastic drum, stored at room temperature, validity for 6 months.
Package
125kg plastic drum or customized.
Notes: Above listed information is confirmed through practice, but owing to different textile printing technics, please make sure one after experiment.
Limited warranty:
As the application conditions and methods of this product in practice are not controllable,we will not give any form of guarantee about the applicatablity, and not afford any occasional or attached lose,the only guarantee we give is that the product we provide is meet the Huancheng available specification
General Description
Suitable for water-based system defoaming, low dosage, rapid defoaming, good effect in foam inhibition. It can be applied in the 100℃water-based system, such as sizing, preparation of pretreatment solution, dyeing bath, printing paste, water-proof coating paste, pigment manufacturing, paper making and effluent treatment.
Technique Data
1. Composition: Silicon emulsion, nonionic surfactant
2. Properties
Appearance: milk white liquid
Solid content:4%
Ion: anionic/nonionic
Solubility: soluble in water
Application methods
Diluted with 20-30 times of water, adding to the defoamed system, dosage depends on the usage, normal dosage for textile printing and dyeing is 200-1000ppm, for paper coating is 500-1500ppp, practical dosage depends on trials.
Safety Notes 125kg plastic drum, stored at room temperature, validity for 6 months.
Package
125kg plastic drum or customized.
Notes: Above listed information is confirmed through practice, but owing to different textile printing technics, please make sure one after experiment.
Limited warranty:
As the application conditions and methods of this product in practice are not controllable,we will not give any form of guarantee about the applicatablity, and not afford any occasional or attached lose,the only guarantee we give is that the product we provide is meet the Huancheng available specification
- Company: Shijiazhuang Huancheng Biochemical Factory
- Contact: Linda Cheng
