Product description 1. Acrylic laser cutting machine HS-B1325 is especially design for high precision cutting demand users. 2. Applicable industries and materials HS-B1325 acrylic laser cutting bed is used for advertising and craft industries. It can cut 20mm acrylic, LED and FGP
Foshan Beyond Laser Technology Co.,Ltd [2014-06-04 01:10:20 ]
Brief introduction This laser cutting machine is widely used in wood, fabric, acrylic, bamboo, leather and other non-metal materials engraving and cutting. Specification Working table(mm) 1300*2500 Laser power(w) 300/500 Weight(kg) 1500 Volume(m3) 8 Machine body size(mm) 3470*189
Foshan Beyond Laser Technology Co.,Ltd [2014-06-04 01:08:50 ]
This machine is designed for circular seam welding of circular wor k piece. (web www-dot-jinanjili-dot-com, email jilimachine-at-gmail-dot-com) It’s suitable for Hydraulic tube welding of loaders, excavators, hoisting machinery. It adopts with pulsed gas shielded welding machin
Jinan Geely Welding Equipment Co., Ltd. [2014-05-29 02:27:01 ]
CSM power steering hose is applied to the pressure side of power steering systems, for its maximum operating pressure reach 1500 psi. CSM tube gives this power steering hose first-class resistance to elevated temperatures, ozone, aging, oil and solvents. CM (CPE) cover is highly
Hebei Jiuxing Rubber & Plastic Product Limited Company [2014-05-29 02:23:33 ]
Power steering hoses are always in pairs - high pressure and low pressure. One transfers power steering liquid from the pump to the mechanism. While the other transfer liquid back to the pump. Both hoses work together to make the steering system operate. Low pressure power steeri
Hebei Jiuxing Rubber & Plastic Product Limited Company [2014-05-29 02:21:56 ]
Power steering return hose is used in the return side of automotive power steering systems. Its tube and cover are made of CR, which has a good resistance to ozone, sunlight, heat, oils and aging. The reinforcement uses 2-spiral synthetic rubber providing protection from the oute
Hebei Jiuxing Rubber & Plastic Product Limited Company [2014-05-29 02:19:52 ]
Power steering pressure hose is available for air, fuel, methanol, hydraulics and lubricating oils between -55℉ to +300℉. Power steering pressure hose cover is fabricated by polyester which is highly resistant to ozone, heat and oil. Its inner tube made of special synthetic r
Hebei Jiuxing Rubber & Plastic Product Limited Company [2014-05-29 02:15:28 ]
Scaffold steel tube use welding and cutting for scaffold system. The scaffold steel tube outer diameter always 48.3mm, 42mm, 60.3mm The scaffold tube thickness could from 1.8-4.0mm Scaffold tube in hot dip galvanized or self finishing. Scaffold tube in length 6meter, 21 feet or o
Tianjin Wellmade Scaffold Co.,Ltd [2014-05-28 21:53:23 ]
Steel Prop A uto-welded steel prop conform to EN1065 standard, powder coated in OD48/56mm for scaffolding and formwork construction. Adjustable length 1.6-2.9m Inner tube OD 48.3x1.8mm Outer tube OD 56x1.6mm Surface Powder coated More info,welcome to contact us. TEL 0086258355731
Tianjin Wellmade Scaffold Co.,Ltd [2014-05-28 21:44:34 ]
1219*1700/Painted/Gi/Main Frame/Vertical Frame/Walkthough/ Frame Scaffolding 1219x1700mm main frame scaffolding in painted or GI finished for Malaysia, Singapore, Sri Lanka This frame scaffolding is produced for South Asia market like Malaysia, Singapore, Indonesia, Sri Lanka, Th
Tianjin Wellmade Scaffold Co.,Ltd [2014-05-28 21:35:54 ]
L ap Joint flange is to use the flange on the pipe end cap, flange can be active on the tube end flange, steel rings and so on. Steel ring or flange is sealing surface of the flange effect is to compress them. Thus due to the blocked steel ring or flange, loose flange is not in c
定襄北城法兰有限公司 [2014-05-28 21:02:06 ]
Engine Engine 449cc, 4-stroke, liquid-cooled, single cylinder, DOHC Bore Stroke 96.0mm (3.78 in) x 62.1mm (2.4 in) Compression Ratio 12.5 1 Fuel System Fuel Injection Starter Primary kick Lubrication Semi-dry sump Ignition Electronic ignition (CDI) Chassis Overall Length 2190 mm
Riodi99 Store [2014-05-28 03:55:49 ]
2013 Suzuki RM-Z450 - USA Specifications/Technical Details Chassis Overall Length 2190 mm (86.2 in) Overall Width 830 mm (32.7 in) Overall Height 1270 mm (50.0 in) Wheelbase 1495 mm (58.9 in) Ground Clearance 325 mm (12.8 in) Seat Height 955 mm (37.6 in) Curb Weight 113 kg (249 l
Riodi99 Store [2014-05-28 03:51:27 ]
Specializing in the production of φ 8 ~ φ 660 various specifications of round tube, square tube, pipe and cold bend section steel with precision roll mold. Factory total area 9173.09 ㎡ , covers an area of 3840 ㎡ in the east fatory , and west factory covers an area of 4086
TENGDI MACHINERY [2014-05-27 22:31:04 ]
Main specification Applicable products Round pipe, square pipe and rectangular pipe Materials of applicable products Q235-345,j55,x42-80,n80 Cutting type Double saw blades, rotary milling type Control system DC drive systems, AC servo system;PLC control Equipment function automat
TENGDI MACHINERY [2014-05-27 22:29:41 ]
FORMING MILL + WELDING STAND + SIZING MILL FS25 FS38 FS50 FS60 FS89 FS140 O D.(mm) 10~32 12~50 12~63 19~63 32~89 89~140 Forming speed(m/min) 20~120 20~120 20~120 20~120 20~80 20~70 Wall thickness(mm) 0.35~1.5 0.4~2.25 0.5~2.75 0.5~3.25 0.6~3.75 0.8~4.25 Motor power(kw) 30(45) 55(
TENGDI MACHINERY [2014-05-27 22:28:10 ]
Reasonable structure; Novel design; Precise and advanced spiral path; High capacity; No scratch to strip; No loop swelling; No loop retracting; Low power consumption Easy operation No strip alarming and length measuring Structure Feed in from outside cage and output from the cent
TENGDI MACHINERY [2014-05-27 22:26:50 ]
Solid-state high frequency welder is mainly applied to high frequency straight seam tube mill line The whole set equipment is composed of switchgear rectifying cabinet,inverter output cabinet,circulation soft water cooling system,console and positioning table. GGP100KW Solid stat
TENGDI MACHINERY [2014-05-27 22:22:35 ]
It consists of base, pinching device, alignment device, shear,travel system,welding mechanical system, hydraulic system, Schneider and/or Siemens electric control, Lincoln welder, torch, wire feeding system,etc. Models for shear and end welder Type Width(mm) Thickness(mm) Working
TENGDI MACHINERY [2014-05-27 22:20:50 ]
Pinch roll 2-foll,driven up and down by hydraulic cylinder Leveling foll 5(2 top and 3bottom),upper roll driven up and down hydraulic cylinder ; fine adjustment for upper foll motor driven,automatic adjustment is possible. Composition Driving device ,pinch foll, flattening device
TENGDI MACHINERY [2014-05-27 21:15:03 ]
