pipe - Manufacturers, Suppliers & Exporters
Anyang Steel Group Co., Ltd is one large iron and steel group located in Hebei,China, we mainly produce hot-rolled coil, hot-rolled section steel, hot-rolled heavy rail, plate of moderate thickness, cold-rolled coil, galvanized plate, cold-rolled oriented and non-oriented silicon
Anyang Steel Group Co., Ltd [2018-06-04 10:26:22 ]
Material high quality 38CrMoAL, 1.8550, 1.8519, SKD11, SKD61, D2, DC53, 42CrMo, 40Cr, C45, C30 Process Advanced nitriding Process Hardness After Hardening & Tempering HB280-320 Nitrided Hardness HV900-1000 Nitrided Case Depth 0.45-0.7mm Nitrided Brittleness Less than Grade 2 Surf
ZHEJIANG GUANGMING PLASTICS MACHINERY CO., LTD [2018-06-04 10:21:47 ]
The device is a specialized tool for clamping drill pipe in mouse when making up and breaking out drill pipe in drilling operation .The most obvious feature of it is auto-adjustble clamping force .There is no need to pull spinning rope ,if match with Kelly spinner to connect sing
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:25:39 ]
Lake Thread Protector for API Oil Drill pipe/Casing and Tubing Thread Protector with Plastic or Steel for Oil Well Equipment It is used to protect OCTG end during storage and transport, and made of a threaded low density or high-density polyethylene bumper, which absorbs the impa
DYLPT [2018-05-25 14:25:38 ]
These series of Rotary bushing are suitable to fit into API drill pipe spider ,drill collar spider ,casing spider and roller bushing ,with two structures of solid boby and split body .TWO types are available ;pin driven and aquare driven .They are designed and manufactured accord
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:23:07 ]
Type Q86-324/75( 33/8~123/4in)manual tong is an essential tool in oil drilling operation to fasten or renove the screws of drill pipe and casing joint or coupling It can be adjusted by changing latch lug jaws and latch steps.
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:21:47 ]
MODEL DDZ Center Latch Elevators are suitable for handing180taper shoulder drill pipe ,drilling tools and etc .The Elevators are designed and manufactured according to API Spec 8A-specification for drilling and production Hoisting Equipment.
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:15:42 ]
The Elevators are hoisting tools for handling 90。 Shoulder drill pipe,casing,tubing and drill collar iin oil and gas field The Elevators are designed and manufactured according to API Spec SA-specificationfor drilling and production Hoisting Equipment.
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:14:34 ]
The Elevators are hoisting tools for handing drill pipe,casing,tubing and collar in oil and gas field The Elevators are designed and manufactured according toAPI Spec 8A-specification for drilling and production Hoisting Equipment.
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:13:24 ]
Slip Type Elevators are holding and hoisting tools for handing drill pipe ,casing, tubing in oil and gas field , They are especially fit to integral joint tubing,non-coupled casing,electric submersible pump and other tubular goods The Elevators are designed and manufactured accor
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:10:43 ]
1.MP safety clamps are tools for handing flush joint pipe and drill collar. 2.Model MP Safety Clamps have 5 type MP-S,MP-R,MP-M,MP-L,MP-XL. 3.The specifications are as bellow
DYLPT [2018-05-25 14:10:33 ]
XSL-Swivel With Spinner is a combination of swivel and Kelly spinner,driven by air motor or bydraulic motor ,with keyless connection adopted between spinner and central pipe of swivel It is designed and manufactured according to API Spec 8A” Specification for Drilling and Produ
Dongying Lake Petroleum Technology co.,ltd [2018-05-25 14:04:24 ]
FREE-VALVE’s flange foot valve is a kind of energy saving valve, usually installed at the bottom of the suction pipe of pump. The function s of foot valve are designed to stop water from going backwards when the pump shuts off and only allow the water flow forward . As many inl
Zhengzhou Free Fluid Control Technology Co.,Ltd [2018-05-25 13:35:10 ]
API 5L PLS1/2 seamless steel Line pipe for oil and gas transport Specification OD 20~406mm(1/2inch~16inch) in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB/T3091-2008 ASTM A53 BS1387 BS EN39 ASTM A500 BS 4568 BS EN31 Usage Used For Water, Gas, Stream, C
Zhongjian Santai (Beijing) International Trade Co., Ltd. [2018-05-22 17:35:51 ]
ASTM A106 Carbon Seamless Steel Pipe manufacturer Specification OD 20~406mm(1/2inch~16inch) in theory Thickness 1.2~15.7mm Length Any Length Below 16 Meter Standard GB/T3091-2008 ASTM A53 BS1387 BS EN39 ASTM A500 BS 4568 BS EN31 Usage Used For Water, Gas, Stream, Combustible Flui
Zhongjian Santai (Beijing) International Trade Co., Ltd. [2018-05-22 17:34:19 ]
Carbon Seamless Steel Pipe for marine electrical is formed by drawing a solid billet over a piercing rod to create the hollow shell, without welding or seam. It is suitable for bending and flanging. The most advantage is increasing the ability of withstanding higher pressure. So
Zhongjian Santai (Beijing) International Trade Co., Ltd. [2018-05-22 17:30:28 ]
4inch Seamless Steel Pipe ASTM A106 Grade B is formed by drawing a solid billet over a piercing rod to create the hollow shell, without welding or seam. It is suitable for bending and flanging. The most advantage is increasing the ability of withstanding higher pressure. So it is
Zhongjian Santai (Beijing) International Trade Co., Ltd. [2018-05-22 17:28:48 ]
Quick Information Brand Name MAONAN Place of Origin China Model Number 07 Color Silver Usage Protection Feature Easily Assembled Length 30m Packing Waterproof Paper Description Packaging & Delivery Packaging Details 1.woven bags of the above and bottom,high quality package
Hebei Maonan Wiremesh Trade Co.,ltd [2018-05-19 17:06:22 ]
LOPO terracotta louver/baguette has wide range of pipe forms with square, oblong, triangle circular cross-sections. This series product is of great functions in decorations and sun protection which is mainly applying in window areas, parapets and balcony etc. Contact Person Kevin
LOPO INTERNATIONAL LIMITED [2018-05-18 17:04:17 ]
Bimetallic liner is made of mature double-liquid pouring process, the working face and non-working face are metallurgical combination, molding needs one time Working face is high hardness of high-alloy high chromium cast iron. The back of the working face is high toughness 35 ste
jingjiang yongxin tegang Co.,Ltd [2018-05-17 17:44:57 ]
