1. Product Description Pneumatic Spiders are mainly utilized in the petrochemical industry to lock and hold drill pipe and oil pipe for well pulling the petro oil and natural gas wells. All spiders can be either manualy, or pneumatically or hydraulically operated to effectively m
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-11 11:33:01 ]
1. Product Description Pneumatic Spiders are mainly utilized in the petrochemical industry to lock and hold drill pipe and oil pipe for well pulling the petro oil and natural gas wells. All spiders can be either manualy, or pneumatically or hydraulically operated to effectively m
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 11:13:57 ]
1. Product Description Fill and Circulate Tool (FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:44:08 ]
1. Product Description The wrench is the best replacement of rotary rope (or chain). It is applied for the mechanized spinning operation. The applicable range of pipe diameter is wide, and it can be freely adjusted whenever necessary. There are two configurations for clamping mec
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:36:00 ]
1. Product Description Stabbing guides are designed to prevent damage during make up. It manufactured from high -grade steel and Nitrile rubber material or Nylon material, it is easy to operate and can protect the screw thread of the pipes effectively. The guides are used availab
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:27:52 ]
Description Lead stabilizer LS-25 is a high efficiency and multifunctional high technology product. It is widely applied in PVC foaming board, profiles, pipe, pipe fitting, WPC, foamed sheet and other PVC plastic products. Key property It has very good dispersibility and compatib
Shandong Polymer Additives Co., Ltd [2019-06-09 21:56:49 ]
Description CPE-135A is widely used for rigid PVC products, such as PVC window profile, pipe, fence, siding and so on, WPC product, etc. Key property l Excellent elongation rate at break l Endow PVC finish products with good toughness l Increase the corner welding strength of PVC
Shandong Polymer Additives Co., Ltd [2019-06-08 00:08:18 ]
Description AIM-50 is mainly used in PVC window profile, PVC pipe and pipe fitting, PVC fence, PVC siding and decking, PVC panel,etc. Key property l Promote fusion l Improve impact strength l Improve weather-resistance Specification Specification Unit Test standard AIM-50 Appeara
Shandong Polymer Additives Co., Ltd [2019-06-07 23:59:06 ]
Description P-175 can be widely used for rigid PVC products such as Windows profile, PVC pipes, PVC pipe fitting ,PVC foaming products, WPC product, etc. Key property l Improve metal release with no influence on fusion l Improve heat stability l Improve melt flow ability l Improv
Shandong Polymer Additives Co., Ltd [2019-06-07 23:31:02 ]
Description P-120N is used to promote fusion of PVC compound. It can be widely used for rigid PVC products such as PVC profile, PVC pipes, PVC pipe fitting and PVC foaming products etc. Key property l Promote fusion of PVC compound l Improve surface gloss of PVC finished products
Shandong Polymer Additives Co., Ltd [2019-06-07 23:01:09 ]
The large backpack weighs 1.2 lbs, fit perfectly under the seat. [Size of the Daypack]--- Approximately measure 19.7 * 11.8 * 7.9 inches (50 * 30 * 20 cm), and the capacity of our hiking backpack is 35L [Durable and Lightweight]--- Made of high quality tear and lightweight materi
DEVELOP BAG CO.,LTD [2019-06-07 10:02:57 ]
FREE-VALVE ’s Floating Ball Type Lining PFA/FEP Check Valve is straight type three piece design and manufactured in f ull p ort u ni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends .The valve uses PTFE as the rolling valve ball, t he valve can be
Zhengzhou Free Fluid Control Technology Co.,Ltd [2019-06-06 14:07:22 ]
FREE-VALVE ’s fluorine lined ball check valve is straight type three piece design and manufactured in f ull p ort u ni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends .The valve uses PTFE as the rolling valve ball, t he valve can be opened or clos
Zhengzhou Free Fluid Control Technology Co.,Ltd [2019-06-06 14:03:56 ]
FREE-VALVE ’s fluorine lined ball check valve is straight type three piece design and manufactured in f ull p ort u ni-directional body design fully lined with FEP, PFA And PTFE having Flanged Ends .The valve uses PTFE as the rolling valve ball, t he valve can be opened or clos
Zhengzhou Free Fluid Control Technology Co.,Ltd [2019-06-06 13:50:43 ]
Standards Application ISO 5660 Reaction to fire tests-Heat release, smoke production and mass loss rate. ASTM E 1354 Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter BS 476 Pt.15 Fire tests on building materials an
Qinsun Instruments (Shanghai) Co., Ltd. [2019-06-06 13:14:43 ]
1. Product Description ST-80 is a kind of iron roughneck with fully-hydraulic drive, compact structure and solid bottom part. It can realize all functions including fastening, loosening, making up and breaking out the drill pipe. 2. Main Technical Parameters 3. Features (1) . Tor
Dongyng Lake Petroleum Technology Co.,Ltd [2019-05-31 14:13:06 ]
1. Product Description SSW40 spinning wrench is applicable to drill pipes and drill collars of 3 1/2~9 1/2in. It is mainly composed of two symmetrical components, each of which drives the gear transmission through air motor and drives the wheel rotation. Operate the air valve wit
Dongyng Lake Petroleum Technology Co.,Ltd [2019-05-31 13:52:12 ]
1. Product Description Pipe wiper rubbers are designed to remove fluids and debris from the pipe when it is being run or pulled. Wipe rubbers can also prevent foreign objects from entering the well bore by covering the annuals between the tubing and casing. Our pipe rubbers are o
Dongyng Lake Petroleum Technology Co.,Ltd [2019-05-31 12:17:12 ]
1. Product Description Hammer Unions are designed as heavy duty, high pressure flow line connectors, which is commonly applied to chemical plants, on marine dredging vessels, in strip mines and in the oil industry. The color coding system on Hammer Unions represent the different
Dongyng Lake Petroleum Technology Co.,Ltd [2019-05-31 11:39:49 ]
This machine can cut metal sheet ,it can also cut cylinder metal with the help of rotary. rotary size can be chosen according to your needs. 1.MACHINE CHARATER #Working area 1300*2500mm #General duty frame(heady duty is optional) #Knife table(Sawtooth table is optional) #Start co
Jinan Link Manufacture & Trading co.,ltd [2019-05-31 10:28:40 ]
