1. Product Description Roller Kelly Bushings can be classified as two types based on different ways of drive, square drive and pin drive. Also they can be classified as three types based on different styles, heavy, medium and light-duty. They are used for 17 1/2 to 49 1/2 inch ro
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:55:16 ]
1. Product Description Fill and Circulate Tool (FAC Tool) is a surface tool used during the casing running operation. The FAC Tool is designed to both fill the casing with drilling fluid while running it in the hole and to enable quick circulation of the casing string at any time
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:44:08 ]
1. Product Description The wrench is the best replacement of rotary rope (or chain). It is applied for the mechanized spinning operation. The applicable range of pipe diameter is wide, and it can be freely adjusted whenever necessary. There are two configurations for clamping mec
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:36:00 ]
1. Product Description Stabbing guides are designed to prevent damage during make up. It manufactured from high -grade steel and Nitrile rubber material or Nylon material, it is easy to operate and can protect the screw thread of the pipes effectively. The guides are used availab
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:27:52 ]
1. Product Description Quick-release thread protector is a tool designed for protecting drilling string thread from abrasion and damage in the process of loading, unloading and transportation in the drill site. It is a king of manual device with a simple structure. The quick-rele
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:18:55 ]
1. Product Description Rod BOP to prevent the leakage of oil and gas in the recovery operation control device, can guarantee the well- flushing, sand washing, fracturing downhole operation smoothly. By changing different valve core, and can meet the needs of all kinds of rod seal
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:08:21 ]
1. Product Description Sucker Rod Wrench is made of high-quality alloy steel, and boasts and advantages of hardness and abrasion resistance. Its opening is applicable to the square shape of the steel-made sucker rod. The balanced design of wrench can reduce the fatigue of users,
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-10 09:00:01 ]
1. Product Description Sucker Rod Hook is one of the hoisting equipments for sucker rods. It is suitable for all depths and operating conditions complete with single-hand latch construction and safety ring. It is safe and dependable enough. The sucker rod hook is designed and man
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-06 18:20:35 ]
1. Product Description Sucker Rod Elevating Socket is used to handle single sucker rods. It is hung on the nacelle of workover rig with maximum working load 400 lb. It is used for 1/2 to 1 1/8 inch sucker rods. 2. Main Technical Parameters Specification of Applicable Sucker Rod (
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-06 18:14:21 ]
1. Product Description Sucker Rod Elevators are hoisting tools for handling sucker rods. These elevators are made from high-quality heat-treated alloy steel for strength and durability and the rated load ability is 25 tons. It used for hoisting the drilling and production equipme
Dongyng Lake Petroleum Technology Co.,Ltd [2019-06-06 18:07:02 ]
C8900FKT39H; HCY0106FDS8Z; LX771B/3; HCY0108FKP13Z; K6-842/P EH fuel tank air breathing apparatus Model PFD-12 Top shaft oil pump outlet filter 707FH3260GA10DN40H7F3.5C Top shaft oil pump inlet filter 707FM1641GA20DN50H1.5F1C Main oil pump suction filter HQ25.300.11Z Regenerative
Xinxiang Shunhe Filter Equipment Co., Ltd. [2019-06-06 17:47:41 ]
DFLQG-0010 DFLQH-0017D DFLQH-0018 DFLQH-0021A DFLQH-0025 DFLQH-0031 DFLQH-0032 DFLQH-0033 DFLQG-0037 DFLQG-0038 DFLQG-0040 DFLQH-0044 DFLQG-0045A DFLQH-0051A LXY180X425/180 LXY96X318/80 LXY143X400/80 SLQ-2 DFLQH-0017D SLQ-40 GST50LH.7.1 Diatomaceous earth filter element Model 30-
Xinxiang Shunhe Filter Equipment Co., Ltd. [2019-06-06 17:46:44 ]
TGKH-028-BC-11B. TGKH-020-BC-D. QGXF-002-2. TGKH-002-2CN. QGBH-007-1AS. QGBH-015-1AS FRD WJA1.059 D28A-690200A001 FRD WSZE.74Q FRD Q6PC.31D016 FRD WJA1.050 FRD WJA1.060 W.38.C.0018 W.38.C.0016 W.38.C0129 W.38.C0132 W.38.Z.00237 AD3E301-02D01V/-F DR1A401EA03V/-W AP3E302-02D01V/-F
Xinxiang Shunhe Filter Equipment Co., Ltd. [2019-06-06 17:45:53 ]
The material and design of the tank are commonly determined by the size and location of the industrial wastewater treatment project. Typically, concrete tanks are larger in size due to the high cost to set up. This high cost makes smaller tanks cost prohibitive relative to other
Center Enamel Co., Ltd [2019-06-06 16:52:23 ]
Brand Name QC lashes Product Name Eyelash Extension Eye Pad Material Cotton Main Ingredient Water, Glycerin, Allantoin, Sorbitol, Sodium Polyacrylate, Cellulose Gum Polyacrylic Acid, Ricinus Communis(Castor), Seed Oil, Triethylhexanoin, Kaolin, Tartaric Acid, AluminumGlycinate, T
Shijiazhuang QC Lashes Co.,Ltd [2019-06-06 10:52:10 ]
Product Description Use Principles Aflatoxin M1 ELISA Assay Kits an indirect competitive enzyme-labeled immunoassay. The Aflatoxin M1 antigen is precoated on the wells. The precoated antigen compete the Aflatoxin M1 antibody (antibody solution) with Aflatoxin M1in the sample, ant
Beijing Meizheng Bio-Tech Co.,Ltd [2019-06-06 09:37:33 ]
MSB-11 two shafts shredder also called two shafts shredding machine,it is the most sucessful model in Enerpat MSB-Series shredders family The machine comes with one 11kw motor,Bonneg brand gear box .the shredding chamber is 385mm for length and 300mm for width we test the machine
Nantong enerpat machinery co. LTD [2019-06-05 15:36:02 ]
Company Profile Specialize in grinding steel ball media products-Suizhou Gaincin Machinery Co.,Ltd(GAINCIN com) FORGED BALLS Grinding Balls in alloy steel rolled and/or stamped. We supply balls on a wide and complete range of hardnesses, with different hardness profiles, to maxim
Suizhou Gaincin Machinery Co.,Ltd [2019-06-05 12:10:30 ]
Forged ball Specification Diameter (mm) Material Chemical elements Hardness (HRC) C Si Mn P/S Cr 20-125 C45 0.42-0.50 0.17-0.37 0.5-0.8 ＜0.035 ≤0.25 48-55 20-140 60Mn 0.55-0.65 0.17-0.37 0.7-1.0 ＜0.04 ＜0.25 56-62 20-125 B2 0.72-0.85 0.17-0.37 0.7-1.0 ＜0.025 0.4-0.6 57-6
Suizhou Gaincin Machinery Co.,Ltd [2019-06-05 11:53:57 ]
Oil motive inlet filter (working) 10μ AP3E302-01D10V/-W DP301EA10V/-W W.38.C.0014 Oil motive inlet filter (flush) 1μ AP3E302-01D01V/-F DP301EA01V/-F W.38.C.0013 Oil motive inlet filter (working) 10μ AP3E302-02D10V/-W DP3SH302EA10V/-W W.38.Z.000208 W.38.Z.000117 pieces D300AE-4
Xinxiang Shunhe Filter Equipment Co., Ltd. [2019-06-04 18:20:16 ]
