Searching model , total 1023725 products,queries done in 74 ms
End Suction Pump

Description QI model pump is single-stage end-suction(axial suction) cantilever type centrifugal pump, which is used to transport corrosive liquid with viscosity similar to water and without solid particles. The marked and rated performances and dimensions adopt ISO2858 internati

Shijiazhuang An Pump Machinery Co., Ltd      [2015-03-18 10:39:39 ]

multistage pump

General Model QD (G) pump is a horizontal multi-stage centrifugal pump and suitable for transporting pure water (with the contained foreign matters' content less than l % and graininess less than 0. 1mm) and other liquids of both physical and chemical natures similar to those of

Shijiazhuang An Pump Machinery Co., Ltd      [2015-03-18 10:39:08 ]

Split Casing pump

General Model QS pump is a single-stage double-suction horizontal split centrifugal pump and used to transport pure water and the liquid of both physical and chemical nature similar to those of water, the maximum temperature of which must not be over 125℃ , suitable for water s

Shijiazhuang An Pump Machinery Co., Ltd      [2015-03-18 10:38:50 ]

Gravel Sand pump

General AMG/AMGH gravel pumps, Construction of this pump is of single casing connected by means of clamp bands and wide wet passage. The wet parts are made of Ni hard and high chromium abrasion resistance alloys. The discharge direction of pump can be oriented in any direction of

Shijiazhuang An Pump Machinery Co., Ltd      [2015-03-18 10:38:10 ]

Vertical Rubber Cutting Machine,Rubber Cutting Machine Manufacturer

Model XQL-8 Cutting Width (mm) 660 Stroke (mm) 680 Diameter of the piston ( mm ) 150 Time taken by the stroke (s) 16~25 Power (KW) 5.5 Overall Dimension (mm) 1900 × 720 × 2580 Weight (kg) 1500 Power Supply AC380V, 50HZ, 3PH

青岛鑫城一鸣橡胶机械有限公司      [2015-03-17 15:31:36 ]

GD-3536A Automatic Cleveland Open Cup Flash Point Testing Equipment

Purpose This GD-3536A Automatic Cleveland Open Cup Flash Point testing equipment is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleve

重庆格纳迪设备有限公司      [2015-03-17 14:07:30 ]

GDE-1B Engler Viscometer /Engler viscosity Viscometer

I Brief Introduction The Engler Viscometer is designed and made as per the National Standard GB/T266 “Test Methods for Engler Viscosity of Petroleum Products” and the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Enginee

重庆格纳迪设备有限公司      [2015-03-17 14:05:54 ]

GD--8017 Crude Oil Vapor Pressure laboratory tester (Reid Method )

I Brief Introduction The instrument is designed and made as per the national standard of People’s Republic of China GB/T8017 Test Method for Vapor Pressure of Petroleum Products (Reid Methods). It is suitable to determine vapor pressure of gasoline, volatile crude oil and other

重庆格纳迪设备有限公司      [2015-03-17 14:03:07 ]

GD-0193 Automatic Petroleum Oils Oxidation Stability Tester of Lubricating Oils

I Brief Introduction The GD-0193 Automatic Petroleum Oils Oxidation Stability Tester of Lubricating Oils (Rotary Oxygen Bomb Methods) is designed and made as per SH/T0193 and ASTM D2272. It is suitable to determine oxidation stability of new or in service turbine oil, which has t

重庆格纳迪设备有限公司      [2015-03-17 13:58:40 ]

GD-11143Corrosion Tester/Steam Turbine Oils Rust Characteristics Tester

I Brief Introduction GD-11143 Lubricting Oils Rust Preventing Characteristics Tester is designed and made as per the National Standard GB/T11143 “Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water”, ASTM D665, and IP135 . GD-111

重庆格纳迪设备有限公司      [2015-03-17 13:53:53 ]

GD-1884 Petroleum Product Oil Density Tester/Oil Density Tester

I Purpose The GD-1884 Petroleum Product Oil Density Tester/Oil Density Tester is designed and made as per the National Standard GB/T 1884-2000 “Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter methods)”. The Density Tester is suitable to determi

重庆格纳迪设备有限公司      [2015-03-17 13:46:40 ]

1350T EVA Foaming Press Machine,Rubber EVA PE Foaming Press Machine Manufacturer

EVA Foam Press,EVA PE Foaming Press Machine Model XLB-1500×2250×6/13.50MN Clamping Force 13.50MN Heating Plate Size 1500×2250×60 (mm) Distance Between Heating Plate 200 (mm) Mould cavity number 6 Diameter Of plunger 900 (mm) Piston Stroke 1000(mm) Material of piston chilled c

青岛鑫城一鸣橡胶机械有限公司      [2015-03-17 13:31:56 ]

GD-0232 Oil and Gas Digital Copper Corrosion Tester

I Brief Introduction The Copper Strip corrosiveness tester is designed and made as per Industry Standard of Petrochemical SH/T0232 “Test Methods for Detection of Copper Corrosion from Liquefied Petroleum Gas by the Copper Strip Tarnish Test”. It is suitable to determine corro

重庆格纳迪设备有限公司      [2015-03-17 11:59:41 ]

GD-265 Petroleum Oil Kinematic Viscometer ASTMD 445

I. Introduction GD-265 Petroleum Oil Kinematic Viscometer ASTMD 445 is designed and made as per the Industry Standard of People’s Republic of China SY/T5651 “ Technical Condition for Kinematic Viscosity of Petroleum Products ”. It is suitable to determine the kinematic visc

重庆格纳迪设备有限公司      [2015-03-17 11:56:37 ]

GD-508 Petroleum Product Ash Content Analyzer

I Brief Introduction The Petroleum Product Ash Content Analyzer is designed and made as per the National Standard GB/T508 “Test Methods for Ash Content of Petroleum Products”. It is suitable to determine ash content of petroleum products. The instrument is not suitable to det

重庆格纳迪设备有限公司      [2015-03-17 11:39:10 ]

GD-17040 X-ray Fluorescence Petroleum Oil Sulfur Content Analyzer

I Brief Introduction GD-17040 ASTMD 4294 X-ray Fluorescence Petroleum Oil Sulfur Content Analyzer is specially designed to determine sulfur content in the petroleum products. Adopts energy-dispersive principle, and with integrated design, it is rapid and accurate. It can meet the

重庆格纳迪设备有限公司      [2015-03-17 11:35:02 ]

used cat excavator 325C good condition

shanghai yangsong construction machinery ​advantage and service 1. ​ensure the quality of machine 2. ​lowest price in the whole field ​ 3. provide after-sale service ​4. reimburse ALL fare in china Used cat excavator 325C Place of Origin USA Model Number CAT325C Conditi

Shanghai Yangsong Construction Machinery Co.,Ltd      [2015-03-16 22:40:22 ]

used cat excavator 325B good condition

Place of Origin USA Brand Name caterpillar Model Number 325B Condition Used,good Year 2002 M ake Caterpillar Moving Type Crawler Excavator Operating Weight 25000kg Bucket capacity 1.0m3 Maximum Digging Height 9500mm Maximum Digging Depth 6030mm Machine Weight 25000kg Max Digging

Shanghai Yangsong Construction Machinery Co.,Ltd      [2015-03-16 22:28:19 ]

used cat 320C excavator

Used CAT 320C excavator Place of Origin Japan Brand Name CAT Model Number 320C Condition Used,good Year 2008 Make CAT Moving Type Crawler Excavator Operating Weight 21760kg Bucket capacity 1.0m3 Maximum Digging Height 9440mm Maximum Digging Depth 6550mm Max Digging Radius 9710mm

Shanghai Yangsong Construction Machinery Co.,Ltd      [2015-03-16 22:06:52 ]

used cat excavator 320B

Used Caterpillar 320B Crawler Excavator Used Caterpillar Excavator details Make Caterpillar Model 320B Condition Used Moving Type Crawler Excavator Year 2004 Worked Hours 3600 Operating Weight 19400kg Bucket Capacity 0.92M3 Max. Digging Height 7580mm Max. Digging Depth 6930mm Max

Shanghai Yangsong Construction Machinery Co.,Ltd      [2015-03-16 21:31:05 ]