2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mol
Packson Mold Co., Ltd [2022-08-01 14:09:18 ]
Soft Magnetic Bonded Compounds As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small a
Hangzhou Chase Technology Co., Ltd [2022-07-19 15:30:24 ]
High density and metal bonded plastic functional composite materials with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace some traditional aluminum alloy, zinc alloy, sta
Hangzhou Chase Technology Co., Ltd [2022-07-19 15:29:58 ]
We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter based on the material characteristics to obtain the best performance of the material, we also cooperate with our customer to analyze
Hangzhou Chase Technology Co., Ltd [2022-07-19 15:29:33 ]
In childhood, magnets were one of our favorite toys. We always played with them and were amazed by their peculiar characteristics. Two magnets always have two sides that can attract each other, and two sides will always repel each other. We always split them up and down. In middl
Hangzhou Chase Technology Co., Ltd [2022-07-19 15:28:03 ]
Product Development Our company is not engaged in product development, but we are willing to assist customers to design product appearance and product structure in case of customer demand. After the product design drawings are reviewed and confirmed by customers, we provide custo
Glitter Mold Technology Co., Ltd [2022-07-18 11:30:47 ]
Mould Spare Parts Plastic mold accessories include single section shoot, double section shoot, double section shoot, flat tip, flat tip, positioning column, plastic mold guide sleeve, straight sleeve, middle column sleeve, plastic mold guide sleeve, etc. Features of Mould Spare P
Glitter Mold Technology Co., Ltd [2022-07-18 11:30:10 ]
Mould Slide The mould slider is a mold component that can slide in a certain angle perpendicular to or with the opening and closing direction during the opening and closing action of the mold. Features of Mould Slide When the product structure makes it impossible for the mold to
Glitter Mold Technology Co., Ltd [2022-07-18 11:29:34 ]
Mould Base After years of development, mold base production industry has been quite mature. Large plastic injection molding companies can purchase customized mold base according to individual mold needs, and also choose standardized mold base products. Features of Mould Base The
Glitter Mold Technology Co., Ltd [2022-07-18 11:28:04 ]
Injection Moulding Products GM-TECH has been manufacturing tools for injection molding of plastics for various industries for more than 10 years. We are also experienced in the automotive, electrical, and home appliance industries but also manufacture moulds for other industries
Glitter Mold Technology Co., Ltd [2022-07-18 11:25:17 ]
Home Appliance Part The development and design of plastic injection molding home appliance parts pay attention to safety and health. In-home appliance industry, polypropylene plastics are used extensively in washing machines and dishwashers. As one of the leading plastic injectio
Glitter Mold Technology Co., Ltd [2022-07-18 11:19:26 ]
As modified high-toughness, high-isotropy, high-quality hot work & plastic mold steel, the steel has good cold and hot fatigue resistance and corrosion resistance, good cold and hot workability, good hardenability, and high thermal strength and oxidation resistance performance at
Jiangsu Hongsheng Heavy Industry Group Co., Ltd [2022-07-15 15:20:42 ]
Our zip tie manufacturer provide reusable cable ties, which is used to bundle cables and wires to keep them organized and secure. Cable tie wraps are fast tying, good insulation, self-locking fastening, and convenient to use. The different types of cable ties can be used in elect
Zhejiang Saichuang Connector co.,ltd [2022-07-12 15:08:32 ]
Custom Mold & Design The overmolded parts is a process that can bond different materials by the injection moulding. Plastic injection overmolding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-sho
HANKING MOULD ENGINEERING LTD. [2022-06-21 13:42:55 ]
A multi cavity mold can be understood, obviously referring to mold with multiple cavities. The multi 8 cavity mold comprises a multi-cavity of the same plastic part and a multi-cavity of different plastic parts. The use of multi-cavity molds for plastic injection molding of plast
HANKING MOULD ENGINEERING LTD. [2022-06-21 13:42:34 ]
Injection Parts Medical HanKing has an experienced team focusing on making injection moulds and molded components for medical parts, medical instruments, medical devices, medical housing and laboratory products. Customers only need to send the part drawing to us, we will deliver
HANKING MOULD ENGINEERING LTD. [2022-06-21 13:42:13 ]
Insert Molding Technologies for Automotive Industry Mould Type Automotive Sensor Plastic Injection Mould Production Material Nylon PA66 No of Cavities 4 cavities Core Material S7 Cavity Material S7 Mold base steel 1.1730 with A/B plate 1.2312 Injection System Cold runner Type of
HANKING MOULD ENGINEERING LTD. [2022-06-21 13:41:51 ]
What is medical insert molding? Insert molding tooling refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled a
HANKING MOULD ENGINEERING LTD. [2022-06-21 13:41:29 ]
Optical fiber interface is a physical interface used to connect optical fiber cables. FC is the abbreviation of ferrale connector. Its external reinforcement method is metal sleeve, and the fastening method is screw buckle. St interface is usually used for 10base-f, SC interface
KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD [2022-06-07 10:53:32 ]
MIM China stand for Metal Injection Molding, it\'s a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered an
KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD [2022-06-07 10:52:58 ]
