high frequency - Manufacturers, Suppliers & Exporters
BBT Medical Ultrasonic Transducer Wuhan BBT Medical is a professional ultrasound transducer manufacturer. Our homemade ultrasonic transducer is a device that converts electrical energy into mechanical energy, usually made of piezoelectric ceramic sheets. The piezoelectric effect
Wuhan BBT Mini-Invasive Medical Tech. Co., Ltd. [2022-07-07 11:52:38 ]
BBT Ultrasonic Generator As a one of the most professional ultrasonic generator manufacturers, BBT ultrasonic frequency generator 55.5Khz provides an excitation signal and a high-frequency AC power source to drive the medical ultrasonic transducer. It offers 3~5 level power adjus
Wuhan BBT Mini-Invasive Medical Tech. Co., Ltd. [2022-07-07 11:49:36 ]
BBT Ultrasonic Surgical System This system is composed of the generator, transducer, and scalpel. And the generator converts electrical energy into mechanical energy through the piezoelectric ceramic sheet in the handle, so that the jaw oscillates at 55.5KHz, and the vibration am
Wuhan BBT Mini-Invasive Medical Tech. Co., Ltd. [2022-07-07 11:48:37 ]
The solid state frequency converter adopts a relatively sealed structure, and the protection level can reach IP55. This solid state frequency converter is a high frequency to low frequency converter . The frequency converter application is very extensive. This solid state frequen
Qingdao CCS Electric Corporation [2022-07-06 09:29:51 ]
The frequency of linear probe is 4-12 MHz, which can be applied on ultrasonic examination of superficial organs, vessels, and tissues, etc. Compared with other linear probes, Stork linear probes have a more professional algorithm platform and GPU framework to ensure clear images.
Chengdu Stork Healthcare Co.,Ltd [2022-06-30 09:28:56 ]
OVERVIEW OF ERW/HFW PIPES ERW pipe is the acronym for electric resistance welded steel pipe, and pipe hfw represents high-frequency china welded steel pipe & erw tube china. The pipes are made from steel coil and the weld seam runs parallel to the pipe. And it is one of the most
CUMIC STEEL LIMITED [2022-06-29 10:53:55 ]
ZECO is a professional rubber lined butterfly valve manufacturers in China and butterfly valve is main products series of ZECO valve. The rubber lined concentric butterfly valve is widely used in various kinds of operating conditions because compare to other valves it cost lower
ZECO VALVE GROUP CO., LTD. [2022-06-29 10:42:41 ]
Medical supplies, laser welded forming, beautiful appearance, firm, flat welding seam, no welding rod, and flux welding sheet metal is needed. As a professional machining company, ETCN also provides our clients with weldable plastic sheet welding copper sheet, welding thin stainl
Shanghai ETCN Electromechanical Equipment Co., Ltd. [2022-06-21 15:48:38 ]
https://www hitsooyee com/Welding-machine-LGK160.html Installation Precautions ＞Input voltage AC3~380V±10%, 50/60Hz ＞Input cable ≥6.0mm², length ≤5m ＞Distribution switch 63A ＞Output cable 25mm², torch length≤20m ＞Ambient temperature -10℃~+40℃ ＞Use environ
Chengdu Sooyee Intelligent Technology Co., Ltd. [2022-06-20 16:41:30 ]
https://www hitsooyee com/Welding-machine-LGK120-LGK130.html Installation Precautions ＞Input voltage AC3~380V±10%, 50/60Hz ＞Input cable ≥6.0mm², length ≤5m ＞Distribution switch 63A ＞Output cable 16mm², torch length≤20m ＞Ambient temperature -10℃~+40℃ ＞Usin
Chengdu Sooyee Intelligent Technology Co., Ltd. [2022-06-20 16:40:12 ]
0.05mm Peel Ply release fabric, nonstick surface, quick heat transfer, not easy to wrinkle when pressing The Detail of 0.05mm Peel Ply Release Fabric Nonstick peel ply release fabric is also called PTFE coated fiberglass, made by special peel ply fiberglass in thickness of 0.02mm
Jiangsu Mutiflon Hi-Tech Co.,Ltd [2022-06-16 09:42:20 ]
https://www hitsooyee com/Welding-machine-LGK80-LGK100.html Installation Precautions ＞Input voltage AC3~380V±10%, 50/60Hz ＞Input cable ≥4.0mm², length ≤5m ＞Distribution switch 63A ＞Output cable 16mm², torch length≤20m ＞Ambient temperature -10℃~+40℃ ＞Using
Chengdu Sooyee Intelligent Technology Co., Ltd. [2022-06-13 19:54:42 ]
As a mim medical ltd, Jlymim provides basic surgical instruments, biopsy forceps, high frequency electric knife nickel and forceps, stapler, orthopedic surgical robot parts and other complex and precise parts for medical treatment. From customized selection of concept raw materia
KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD [2022-06-07 10:51:33 ]
CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete orientation options. C plane sapphire wafers are being extensively used for epitaxial growth of III-V and II-VI compounds, such as gallium nitride (GaN), aluminum nitride (AlN), for br
CRYSCORE OPTOELECTRONIC LIMITED [2022-05-25 15:32:41 ]
Features 1. Bluetooth communication interface, battery-powered and rechargeable. 2. Support the work of the high-frequency band 13.56 MHz. 3. Comply with ISO/IEC14443 A/B, ISO/IEC15693 international protocol standards. 4. Support a variety of contactless smart cards and electroni
Shenzhen DTB RFID Co., Ltd. [2022-05-20 10:34:38 ]
What Is Anti Metal RFID Tag The working frequency of high quality rfid sticker label is 13.56mhz. The RFID antenna of this frequency can be made by several methods copper coil winding, aluminum foil etching, conductive silver paste printing.13.56 mhz rfid tag design is mainly com
Shenzhen DTB RFID Co., Ltd. [2022-05-20 10:31:24 ]
With rich experience in researching, manufacturing and selling custom rfid products and solutions, DTB production lines already covered RFID cards, China RFID tags, RFID inlay, RFID wristband and RFID reader. RFID products provided by DTB are widely used in transportation, educat
Shenzhen DTB RFID Co., Ltd. [2022-05-20 10:11:07 ]
EL backlight is driven by high frequency and low power. EL is very thin, it is a substitute for traditional lighting technology, and is widely used in various electronic accessories. The life of EL backlight products mainly depends on the driving voltage, frequency, temperature a
Dongguan Niceone Electronics Technology Co,Limited [2022-05-18 13:36:54 ]
Hard alloy carbide is an important raw material for cutter heads. At present, most of the manufacture of cemented carbide cutting tools uses high-frequency induction heating brazing technology. Due to the special structure of some cemented carbide tools, it is necessary to strict
Chengdu Jinkezhi Electronic Co., Ltd [2022-05-17 11:19:11 ]
SWP series are JKZ\'s newly designed and manufactured induction heating power supplies. The MT version of SWP series equipment uses IGBT as the core component, and its frequency range is from 15KHZ to 30KHz. The maximum single machine power of this ultra high frequency induction
Chengdu Jinkezhi Electronic Co., Ltd [2022-05-17 11:17:38 ]
