The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB circuit board. It is based on the fluxgate technology and can realize the isolated measurement of DC current and AC current. Measuring range from ±6A to ±50A. Accuracy ±0.8%. Linearit
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-25 10:20:11 ]
BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under normal conditions, the control circuit generates a fixed excitation current frequency to alternately place the magnetic core at the maximum saturation point. When the measured current f
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-19 15:57:01 ]
AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Key Technologies Excitation closed-l
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-19 15:55:02 ]
Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200ppm (200 parts per million). The multi-point zero-flux technology system applied in this high-precision DC transducer enables zero-flux closed loop control of excitation flux, DC flux
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-09-02 09:39:00 ]
RIT001M has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current DC0.01, Overloa
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:12:18 ]
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current DC600A, AC424A,
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:09:48 ]
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current DC200A, AC141A,
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:04:06 ]
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-prec
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-28 15:03:58 ]
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range ±1500A Output signal sta
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-23 17:52:16 ]
AIT600-SG has a high gain and measurement accuracy in the full bandwidth range, due to theapplicationofthe multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range ±600A Output signal analog
Shenzhen Hangzhi Precision Electronics Co., Ltd [2024-08-23 17:52:04 ]
\"China factory 16mm Eddy Current Sensor PR6424/010-010 for power station Deyang YOYIK skill is strong, the production of strict accordance with national standards. With the power station forging, mining metallurgy, rolling, cement and spare parts spare parts, metallurgy, rolling
DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD [2024-02-18 10:03:42 ]
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for on-si
gfuvegroup [2024-01-25 17:45:13 ]
As one of the established hall sensor manufacturers, Acrel offers AHKC Series Hall sensor, which is mainly suitable for the isolation conversion of complex signals such as AC, DC, and pulse. Through the Hall effect principle, the converted signal can be directly collected and acc
Jiangsu Acrel Electrical Manufacturing Co., LTD.1 [2024-01-19 10:12:35 ]
\"China factory Eddy current sensor 8 mm 310880-50-03-01 for power station Deyang YOYIK have power plant professional accessories, non-standard pieces, to spare parts for processing. Only need to figure the number of other companies need drawings and drawings number. If you have
DEYANG DONGFANG YOYIK ENGNIEERING CO [2023-11-27 11:02:23 ]
\"Made in China Turbine Metal Temperature WRNK2-2946 for thermal power plant YOYIK is a hi-tech company specializing in the production, development and sale of spare parts for power plant. The company is located in China\'s heavy-duty base in Sichuan Deyang. The company\'s produc
DEYANG DONGFANG YOYIK ENGNIEERING CO [2023-11-20 11:31:17 ]
This product is an on-line monitoring and data acquisition device for monitor surge protectors (SPDs). It mainly collects SPD damage status and damage degree, circuit breaker trip status, SPD false grounding and poor grounding status, SPD action times, SPD temperature, system Vol
Shenzhen Techwin Lightning Technologies Co., Ltd [2023-11-13 15:03:17 ]
Acrel power sensor is designed for industrial electrical measurement of low voltage system, include current transformer, hall effect current sensor, current transducer, power transducer and analog signal isolator. High accuracy with CE/IEC standard. Acrel power sensor contributes
Jiangsu Acrel Electrical Manufacturing Co., LTD.1 [2023-11-03 11:11:23 ]
Acrel DJSF Series modbus dc power meter with double channels DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC sys
Jiangsu Acrel Electrical Manufacturing Co., LTD.1 [2023-11-03 11:11:04 ]
Acrel DJSF Series modbus dc power meter with double channels DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC sys
Jiangsu Acrel Electrical Manufacturing Co., LTD.1 [2023-06-28 15:10:58 ]
As one of the established hall sensor manufacturers, Acrel offers AHKC Series Hall sensor, which is mainly suitable for the isolation conversion of complex signals such as AC, DC, and pulse. Through the Hall effect principle, the converted signal can be directly collected and acc
Jiangsu Acrel Electrical Manufacturing Co., LTD.1 [2023-06-28 15:05:45 ]