Additional Mounting MethodsConax offers numerous combinations of pipe nipples, hex nipples, unions and couplings to be used to Additional Mounting MethodsConax offers numerous combinations of pipe nipples, hex nipples, unions and couplings to be used to mount your assembly to a v
These. sense the engine/water temperature and transmit to the temperature. gauge. They are NTC/PTC thermister types and housed i Thesesense the engine/water temperature and transmit to the temperaturegauge. They are NTC/PTC thermister types and housed in different fitmentoptions
WA L - Inductive standard displacement transducer (plunger) 4.8
Model PDF Download GDT-100 GDT-1000 "GDAT" Average Temperature Sensor is intended for installing on Ventilation GDAT" Average Temperature Sensor is intended for installing on Ventilation and Air Handling Units will be used on following usages. Sensing the Temperature of supplying
TRANSDUCERS CR 5210/20S The CR5210/20S Series are DC Current Sensing devices that give the average DC value of a direct current input waveform. The CR5210S has a +/- 5VDC that is Bi-Directional, ideal for battery charging applciations. Available with analog 4-20 ma or 0-5 Vdc out
RF CYBLE (WIRELESS TRANSMIT) SENSOR RF CYBLE (WIRELESS TRANSMIT) SENSOR
S200 Series Thermal Sensors S200 Series Thermal Sensors 3 Models Covering the 20 mW-30 W Range Wavelength Range 250 nm-10.6 ?m Ideal for General High Optical Power Measurements Post and Postholder Sold Separately
VSS-VT 4.5 ?10.0 Vdc 10ma .5 ?4.5 Vdc -40 F to + 150 F (-40 C to +65 C) CAN Bus Voltage/Temperature Sensor Monitors voltage and temperature at the vehicle's battery post. Communicates directly with the VANN Bus equalizer- water resistant
200LM450 Transceiver Center Frequency 200.010.0Khz Specification 200LM450 Transceiver Center Frequency 200.0
Autoclave pressure fitting Protection rating IP65 Ranges from 0...1000 to 0...5000 bar / 0...15000 to 0...70000 psi Accuracy 0.3% FSO Stainless steel construction Internally generated calibration signal Autoclave pressure fitting Protection rating IP65
ButtKicker LFE Kit 679,00 EUR incl. 19 % Tax excl Shipping costs Weight 20.00kg Product No. 001074 Power Handling 1900 watts @ 2 ohms Either 120v or 240v Versions Weight 1000 watts @ 4 ohms Dimensions 12" W x 12" L x 4" H 25 lbs / 11.4 kgs Power Handling 400 watts min. / 1500 wat
Payment Terms T/T We are one of leading professional suppliers for Ceramic PTC Thermistor. For more information , pls feel free to contact us.
Nominal Current Range Ipn (Apn) Power Supply Range (V) Bandwidth (kHz) Mounting Technology Series C PCB DC - 150 0.4 - 0.9% +/- 12...15 0.25 - 200 Series Technology Mounting Bandwidth (kHz) Global Accuracy @ +25
Ceramic base resistant to severe environments For hydrogen sulfide detectors TGS825 Hydrogen sulfide 5 - 100ppm 660mW Ceramic base resistant to severe environments For hydrogen sulfide detectors
wave transducer that uses water between a transducer and testing subjects as a couplant. between a transducer and testing subjects as a couplant. Longitudinal or shear waves are possible since this transducer can vary an incidence angle at its option. Also, posing testing subject
Product Information Specification Body Length 130mm Overall Length 337mm Specification Body Length 130mm Overall Length 337mm Outside Diameter 17mm Internal Diameter 125mm Sensor Stainless Steel
The AKCP airflow sensor is designed for systems that generate heat in the course of their operation The AKCP airflow sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated. System r
BT ELEMENT SDN BHD first commenced business on 19th December 1996. BT ELEMENT SDN BHD first commenced business on 19 th December 1996. We have progressed well and today we are a competing heating element company in Malaysia. We offer a wide range of products ranging from heater e
Operating Magnet Powerful operating magnets for use with magnetic proximity switches.
