The Sweating Guarded Hotplate simulates the heat and mass transfer processes which occur next to human skin. Measurement of thermal resistance and water vapor resistance under steady state conditions of a range of products of fabrics, films, coatings, foams, and leathers, includi
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 11:03:33 ]
The instrument comprises a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below the nozzle. The appearance of the specimen is compared against an optional photographic scale.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:57:48 ]
To determine color fastness and shrinkage to hot pressing and dry heat and to conduct sublimation tests. Providing controlled conditions of dry heat and pressure with top and bottom heated surfaces, electronic temperature controller and carefully controlled top plate weight. Two
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:56:07 ]
Complete with viewing cabinet and comparison photographs for different fabric constructions. The instrument is provided with 4 rotating test cylinders fitted with sleeves of test fabric, mace balls with tungsten carbide points and controlled by a predetermined electronic counter.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:55:07 ]
Steaming Cylinder determines the shrinkage of unstressed fabric samples subjected to steaming in a closed chamber with its integral steam generator. Provided with a stainless steel fabric supporting frame to accommodate 4 samples and an automatic timer. The Steaming Stability Tem
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:52:52 ]
1. Sample holder：Length 150mm × 75mm wide 2. Frame marking line under the sample ignition point of 75mm 3. Ignition time 0 ~ 99.99 seconds set arbitrarily 4. Flame height measuring device Flame height：40±2mm 5. distance between Ignition and specimen holder 15mm 6. The use
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:25:57 ]
QuickSpin system consists of two independent testing units, the micro-Dust and Trash Analyzer and the QuickSpin Unit. The Micro-Dust and Trash Analyzer processes raw cotton from the bale, tufts before carding and draw-frames slivers, it provides data relating to impurities - such
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:22:18 ]
Gellowen has developed its filter media testing system of G505 for the determination of particle concentration, dust penetration, cycle time, pressure drop, residual pressure drop, fractional efficiency, gravimetric separation efficiency. G505 allows testing of specific filter me
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:21:17 ]
Seat flammability tester GELLOWEN V-211 has been designed and engineered to conform to the below standards. The device use for assessment of the ignitability of upholstered seating by simulating cigarette and match as flame ignition source.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-10 10:19:07 ]
The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary abrasion test.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:23:07 ]
Tensile speed 20mm / s-250mm / s, not adjustable; Test stroke 100-3000mm; (customizable increased to 3400mm); Rated tension, within the range of 0.1N-200N adjustable tested for tensile force can be set according to the actual testing requirements; Side LCD controller, preset draw
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:17:41 ]
It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure.
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:13:05 ]
tems Parameters The measuring range of electrostatic voltage 0 ~ 10kV The half-life time range 0 ~ 99.99 h Rotation speed 1500 RPM Discharge time 0 ~ 99.99 s (test is scheduled (30 + 0.1) seconds) Discharge distance between needle electrode and specimen 20mm Measurement distance
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:10:41 ]
Items Parameters Injection distance 300mm～305mm, adjustable Nozzle diameter 0.84mm Jet velocity 450cm/s,550cm/s,635cm/s
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 15:09:34 ]
Items Parameters Dimension 1200mm X 600mmx 1200mm Timer accuracy ：0.1s Power supply ：220v，50/60Hz
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 14:28:54 ]
Load range 50N, 100N, 250N, 500N, 1000N.(Personal customization available) Accuracy 0.03%FS max Max travel distance 1100mm. Test speed 0.1mm/min - 1000mm/min. Displacement accuracy better than 0.01mm. Sample width 38mm. (optional) Sample thickness 5mm. (optional)
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 14:26:07 ]
Parameter Item Technical index Test environment Temperature (21 + 5) ℃, Relative humidity (85±10)% Injection distance (300±10)mm Nozzle diameter Φ0.84mm，length 12.7mm Liquid injection speed 450cm/s; 550 cm/s; 635 cm/s Nozzle pressure Standard 10.7kpa 16kpa 21.3kpa (adjusta
Shanghai Qianshi Precision Electromechanical Techn [2025-01-09 14:05:34 ]
Application Fabric spray rating tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the penetration of water through
Standard International Group (HK) Limited [2025-01-08 15:21:35 ]
Bursting Strength Tester, to test the bursting strength of paper, woven or knitted fabrics, non-woven, fabric and board by the of hydraulic load under a Bursting tester diaphragm of a specific area. Application Fabrics that must bear weight or withstand forces should be tested wi
Standard International Group (HK) Limited [2025-01-08 15:09:04 ]
Introduction Protective clothing flame spread tester is made according to ISO 15025 standard. It can test the flame spread state under the small flame . It is used to simulate the protective clothing is at the risk of ignition to assume the flame spread performance . It is also s
Standard International Group (HK) Limited [2025-01-08 14:57:50 ]
