SFTS-1-8-F Sealant Tape Used to seal all splices of Protectowire Linear Heat Detector against moisture.
Material PVC Material PVC Magnetic Seal, Glass to Glass at 135o Available for glass thickness 6mm, (1/4"), 8mm (5/16") , 10mm (3/8") and 12mm (1/2 Made of PVC material with pressed in magnetic powder With Soft Vinyl in the profile providing more clamping force onto glass Stocked
H06C IMAGE UNAVAILABLE VALVE STEM SEAL 8.5 15.8 15 VS05030
Ferolite IT 300 Steel 5. IGNITION LOSS IS 2712/1998 % 4. RECOVERY IS 2712/1998 % >40 3. COMPRESSIBILITY IS 2712/1998 % 6 14 2. TENSILE STRENGTH IS 2712/1998 Mpa >24 1. DENSITY IS 2712/1998 g /cm3 1.80 - 2.10 The following Information Applies to material Thickness 1.5mm. 0.80 mm t
Padlock Seals with Tail Padlock Seals with Tail Polypropylene padlock seal with strap made of the same material. Resistant against atmospheric, chemical agents and sunlight exposure.
Metal parts are not in contact with fluid Compensates for shaft wide run-out Applications Suitable for a wide range of applications on corrosive fluids such as acids, alkalines and solvents Materials Metal Parts AISI 316 Spring Hastelloy C Faces GFT - SiC Secondary Seal PTFE
Style Oil Style Oil Oil Seal Kit, Front Fork, 1977-1984, FL, FLH, FLH-80, FLT-80, FLT Classic Oil Seal Kit, Front Fork, 1977-1984, FL, FLH, FLH-80, FLT-80, FLT Classic OEM Part # 45849-77 Model FL, FLH, FLT Year(s) 1977-1984 Package
This type METAL BELLOW CARTRIDGE SEAL is generally used in light abrasives, light sewage, petrochemicals, light chemicals 2000 rpm ( Max ) Speed (-) 40C to (+) 350 C Temperature 20 Bar ( Max ) Pressure 25 mm to 100mm Shaft Diameter Operating Limits SS-316, Hastelloy , Aloy
Gas Lift valve seal comes in various material. We manufacture gas lift valve seal in different sizes The types of Gas Lift Valve Seals material available are Nitrile, Neoprene, Aflas, Viton and Filled TFE. We stock a wide range of Gas Lift Valve Seals. We supplies these Gas Lift
Parker offers a wide variety of seals which consist of composite seals, PTFE seals and rotary shaft seals. Parker offers a wide variety of seals which consist of composite seals, metal seals, molded seals, PTFE seals and rotary shaft seals. From the near-absolute vacuum of space
HM8 (HM9 differ from HM8 by applying a PTFE O ring instead of rubber ring) Metric Size available Speed 25 m/sec Pressure Below 1.7 MPa Temperature - 40 150 degrees Celsius APPLICATIONS For all types of rotating equipment, pumps, mixers, agitators and compressors. Suitable for
Custom-made of different colors and specifications. Amply specification Custom-made of different colors and specifications.
Mechanical seals are mainly used for high speed sealing between liquids Mechanical seals are mainly used for high speed sealing between liquids and two gases the two surface aids the lubrication of the two surface, conduct heat caused by friction and improve the sealing effect. T
Style Hydraulic Style Hydraulic One-direction rubber seal for high pressure applications where low running friction is needed Johnson Packings' full line of O-Rings includes Aflas? Buna-N Kalrez? EPR Metal Neoprene Quad Rings Silicone Teflon? Teflon? Encapsulated Viton O-Ring Mat
Includes mechanical seals applicable to specific pump brands and models Includes mechanical seals applicable to specific pump brands and models and manufactured according to original equipment manufacturers' design and specifications.
TMG1 TYPE (UNBALANCED) ELASTOMER BELLOWS RMG Identical to MG1, but with a special bellows surface on the shaft side. For use in hot-water pumps at up to 120 o C and 25 bar and/or 140 o C/16 bar . Only in combination with seat G 606. d1=12~38 mm. TMG1S20 Dimensions, items and desi
Major for water pumps and circulation pumps. Sizes available in 10 mm to 32 mm Applications Temperature 20? - 100? C Pressure 0.6 MPa Speed 10 m/sec Major for water pumps and circulation pumps Sizes available in 10 mm to 32 mm
Secondary Seal (NBR/EPDM/VITON) Stationary Ring (J -SIL/ TC/S -SIL)
Style Hydraulic Style Hydraulic The rod seal is the seal in the hydraulic cylinder with the most demanding requirement specifications The rod seals task is very difficult since it must seal at both high and low pressure, often in combination with alternating high and low temperat
