Manufactured by flexible uncoated or tinned copper cables with a wire-0,15mm or 0,05/0,07/0,10 mm on request with copper terminals. Manufacturing in large as well as small quantities in length acc. to your wishes. On request it is also possible to order an insulated design . When
JINGU Electric Co.,Ltd [2015-08-25 11:07:43 ]
Uncoated or tinned Copper braid, flexible wire-0,15mm(standard) or 0,05/0,07/0,10 mm on request with solderless pressed contact areas made out of tinned or uncoated, seamless Copper tubes. Contact areas rectangular without bending protection(standard). With or bending protection
JINGU Electric Co.,Ltd [2015-08-25 11:05:33 ]
Manufactured out of flexible braided copper tapes made out of annealed, tinned Cu-ETP1 wires,with solderless pressed terminals. Everywhere applicable where connections with smaller cross-sections made out of braided copper tapes are needed http://www jingug com
JINGU Electric Co.,Ltd [2015-08-25 11:05:31 ]
Manufactured out of highly flexible braids with solderless pressed contact areas made out of seamless Cu-ETP-tubes The crimping process is realized without using additives like tin or soldering and welding additives. We use exclusively materials of same analysis and same conducti
JINGU Electric Co.,Ltd [2015-08-25 11:04:47 ]
Name EN877 SML Cast Iron Fittings/DIN19522 Cast Iron Pipe Fittings Size Complete EN877 pipe range and sizes from DN40 to DN300, including the DE75, DN70 DN400 special for European market. Standard Cast iron pipes and fittings are manufactured in accordance with EN877/ DIN19522 /I
Dinsen Impex Corporation [2015-08-25 08:58:47 ]
Couplings Dinsen supplies couplings for all size of cast iron drainage pipe systems. When you choose our products it will bring you the following convenience 1.Easy and fast installation with no specialists required 2.High strength stainless steel materials（SS316） for steel b
Dinsen Impex Corporation [2015-08-25 08:47:40 ]
I Name China factory SML cast iron drainage pipe Size Complete EN877 pipe range and sizes from DN40 to DN300, including the DE75, DN70 DN400 special for European market. Standard Cast iron pipes and fittings are manufactured in accordance with EN877/ DIN19522 /ISO6594 and ASTM A8
Dinsen Impex Corporation [2015-08-25 08:44:29 ]
Changxing Machinery (Linyi) Co.,Ltd,founded in 2003,which is located in the largest panel production base of China-Linyi city,Shandong province It inherits the best technologies and management ideas from its parent company Taiwan Changxing Machinery Co.,Ltd,which was founded in K
Changxing Machinery (Linyi) Co.,Ltd [2015-08-24 20:41:47 ]
Woodworking Machine/Automatic Puttying Drying Machine This Machine Adopts laser scanning imaging technology,Snapping holes,seams,pits and flaws by HD camera and have them amplified,recongnized and output a open-close signal for puttying. Model Working Width Panel Thickness Speed
Changxing Machinery (Linyi) Co.,Ltd [2015-08-24 20:25:08 ]
*leather men jackets with waterproof, and breathable technology *jacket clothing 100% taped, seam-sealed *Customized PU jacket logo/print/embroidery Place of Origin Shishi Brand Name SIYU Model Number CC-7520 Age Group Adults Product Type Leather jacket Color Brown Type Men leath
石狮市思宇服饰有限公司 [2015-08-24 17:50:15 ]
PARAMETERS Drive Unit 10mm Sensitivity 95dB±3dB Impedance 32Ω±15% Frequence Response 20-20000Hz Plug Type φ3.5mm Cord length 1.2m Using the Microphone Control One click To answer or end a call. Press and release the center button once to answer. Repeat to end the call; Two cl
广州翊森电子科技有限公司 [2015-08-24 17:17:26 ]
1.PLC system, automatic grade, high efficiency. 2.Advanced hydraulic system makes it high stability and reliable performance. Quality assurance of the boards. 3.Combined frame is made of high quality steel, make the machine solid durable, reliable performance without distortion a
Changxing Machinery (Linyi) Co.,Ltd [2015-08-24 16:52:45 ]
PARAMETERS Drive Unit 8mm Sensitivity 92dB±3dB Impedance 16Ω±15% Frequence Response 20-20000Hz Plug Type φ3.5mm Cord length 1.2m Using the Microphone Control One click To answer or end a call. Press and release the center button once to answer. Repeat to end the call; Two cli
广州翊森电子科技有限公司 [2015-08-24 16:38:10 ]
PARAMETERS Drive Unit 10mm Sensitivity 95dB±3dB Impedance 16Ω±15% Frequence Response 20-20000Hz Plug Type φ3.5mm Cord length 1.2m Using the Microphone Control One click To answer or end a call. Press and release the center button once to answer. Repeat to end the call; Two cl
广州翊森电子科技有限公司 [2015-08-24 15:15:24 ]
EPS Composite Steel PanelApplicationsAll kinds of roof and wall decoration and various interior and exterior decorative materials; it meets any requirements of buildings SufacePPGI, Galvanized sheet, http://www sdppgl com
Shandong Lantian Sheet Co., Ltd [2015-08-24 15:08:43 ]
Z-shape sheets widely used steel structure building purlin, wall beam, but also to a combination of light weight roof truss, bracket etc building unit. In addition, still can be used for mechanical light industry manufacturing of the column, beam and arm, etc http://www sdppgl co
Shandong Lantian Sheet Co., Ltd [2015-08-24 15:03:03 ]
The ultraviolet band including UVA (320nm-380nm), UVB band (280nm-320nm) and UVC band (200nm-280nm). UVA wave band is mainly used for light curing, UV light exposure lithography, lithography, integrated circuit industry etc.. UVC band, also known as the short wave ultraviolet ste
Shenzhen Linshang Technology Co. , Ltd. [2015-08-24 15:02:37 ]
Steel Grade SGCC, DX51D, DX52D, DX53D, ASTM, DIN, GB, JIS Certificate Standard ISO9001 2008, ISO14001 2004, OHSAS18001 1999, SGS, BV MOQ 25 T per color per size Payment terms T/T, L/C at sight, Usance LC Delivery time Within 30 working days after deposit http://www sdppgl com
Shandong Lantian Sheet Co., Ltd [2015-08-24 14:59:36 ]
Thickness 0.14-1.0 mm Width 1000 mm Single weight Normally 3-6tons Coil ID 508/610 mm Thickness Tolerance ±0.02mm Width Tolerance ±0.2mm Steel Grade SGCC, DX51D, DX52D, DX53D, ASTM, DIN, GB, JIS Certificate Standard ISO9001 2008, ISO14001 2004, OHSAS18001 1999, SGS, BV MOQ 25 T
Shandong Lantian Sheet Co., Ltd [2015-08-24 14:56:01 ]
Width Tolerance ±0.2mm Steel Grade JIS Certificate Standard ISO9001 2008, ISO14001 2004, OHSAS18001 1999, SGS, BV MOQ 25 T per color per size Payment terms T/T, L/C at sight, Usance LC Delivery time Within 30 working days after deposit http://www sdppgl com
Shandong Lantian Sheet Co., Ltd [2015-08-24 14:52:42 ]
